Procharger Kit (D1SC)
Procharger Kit (D1SC) This is D1SC Procharger set. I had been collecting parts for almost a year but get too high on the credit card so think I won't be able to finish my illussion. Some parts are used but low millage, others are brand new. You will only need the cheapest parts to complete the set up that are, the fan shroud and fan unit from Procharger, that you can get them from Bob at EPP; maybe a few (but not shure), bolts and screws. Tune/program also. The kit is as follows:
1.D1SC unit with the J bracket and pulley (low millage).
2.Brand new set of all the hoses, tubing and clamps, Polished plenum, black blow off valve from Procharger and the up graded 4.5" twin intercoolers; also includes the air and horn rellocation brackets. This is an 8 ribs set up (pulleys). The pulleys doesn't have any numbers at them but what I measured was about:7.6 at the crank pulley, 2.0 at the tensioner pulley and 4.2 at the blower pulley (+/-).
3.60# Mototron injectors (low millage).
4.Brand new GS340 fuel pump.
5.Brand new crank pinning kit.
6.ATI Super Damper (used; it has a lost piece at one of inner ribs, about an inch, but the guy told me that never had problems with slippering belts). It cost about 450.00 new. It has a part # of 917017 in one side and a 916732 (this is the A/C side I think). Yoy may call Procharger and will see that this damper fits F bodies. I think that they told me that is 10% under drive.
I live in Puerto Rico so the kit would be shipped by USPS (Parcel Post, with insurance). I'm looking to recover at least 4,500.00. I will cover the shipping quotes via USPS. I accept pay pal but need to make an arrangement with this; they charge me about 3%. See my feedbacks here or on ebay (yellow69birds).
Thanks, Mike (PR).
Photos upon request.
1.D1SC unit with the J bracket and pulley (low millage).
2.Brand new set of all the hoses, tubing and clamps, Polished plenum, black blow off valve from Procharger and the up graded 4.5" twin intercoolers; also includes the air and horn rellocation brackets. This is an 8 ribs set up (pulleys). The pulleys doesn't have any numbers at them but what I measured was about:7.6 at the crank pulley, 2.0 at the tensioner pulley and 4.2 at the blower pulley (+/-).
3.60# Mototron injectors (low millage).
4.Brand new GS340 fuel pump.
5.Brand new crank pinning kit.
6.ATI Super Damper (used; it has a lost piece at one of inner ribs, about an inch, but the guy told me that never had problems with slippering belts). It cost about 450.00 new. It has a part # of 917017 in one side and a 916732 (this is the A/C side I think). Yoy may call Procharger and will see that this damper fits F bodies. I think that they told me that is 10% under drive.
I live in Puerto Rico so the kit would be shipped by USPS (Parcel Post, with insurance). I'm looking to recover at least 4,500.00. I will cover the shipping quotes via USPS. I accept pay pal but need to make an arrangement with this; they charge me about 3%. See my feedbacks here or on ebay (yellow69birds).
Thanks, Mike (PR).
Photos upon request.
Last edited by Mike Cordero; Sep 11, 2008 at 07:40 PM. Reason: Add info
