Hi guys,
I have been parting out alot of engines as of late and unfortunately most of the wiring harnesses are chopped so I was wondering if there is any interest in connector pigtails, I have ton off of different engines and will sell em for a buck apiece + shipping. I don't have everything but let me know if you guys have any needs.
-Nick

 

Have any OBDII plugs? I'll take a few of those, maybe some injector plugs. Any EV6 injector plugs off I think the LS2 engines?

 

alternator plug and iac plug..the 99 ls1 harness i bought is supposed to be missing those 2

 

Do you have any LS1 fuel injector connectors? I need fuel injectors connectors and wiring back to PCM or maybe just fuel injector connector pigtails. And also a ECT connector pigtail would be nice. Thanks George

 

I could use an OBDII plug as well, and some LS1 injector plugs (all 8 actually)... And, it's not engine, but I will probably be needing the plug that goes into the back of the gauge cluster...

 

No OBD II sorry, these are all from the firewall forward. I have 24 Injector plugs as of right now for the truck style injectors (same as LS2 I believe?) I am 99% sure I have the alternator and I am sure I have IAC. Not sure waht ECT is? They will be available as pigtails only ( I'll give you guys at least 6 inches of wire. Start shooting me PM's so I can get a little more organized on this.
-Nick