The C6 parts are from an 07 Victory Red C6 with only 5500 Miles and the turbo is from the same car most parts were stripped of in favor of new parts that came with the OFI single kit on the car now. Anything I dont have pictures of I am working on getting them and I will post them up as soon as I do.

C6 OEM Hood with liner, perfect shape, no scratches or anything, only reason for sale is becuase I ran into Louis from LG Motorsports at Corvettes at Carlise and he gave me a great deal on one of their heat extractor hoods - $400 SHIPPED


C6 OEM E-Fan, perfect working order - $100 SHIPPED


LS2 Fuel Rail Covers - SOLD

C6 OEM OEM Radiator, in great shape, no holes or anything the OFI kit just came with a different radiator - $125 SHIPPED


And for the Good stuff - I have a T6 Flange S series turbo from forced inductions with less than 200 driving miles + dynotuning time. This is the turbo from the very first OFI C6 Single turbo kit, which was originally supposed to come equipped with an ST-76 unit, instead I got this S76 turbo with a 1.32A/R and a 96MM turbine wheel. This turbo is setup to make BIG power on a large cube motor. The only reason for selling is because while I do like to visit the dragstrip with the car, I really want more of a street car with a faster spool, and for the 370" engine that is being built for me right now Jose convinced me to go with a different turbo. $900 SHIPPED





I also have a seasoned 6.0L Iron LQ9 block for sale asking, block has some surface rust mostly in the lifter tray area, ABSOLUTLEY NO RUST on any machined surfaces. SOLD
This bare block comes equipped with:
-ARP 12PT Main Studs
-Weston Machine Billet Main Caps
-Line Honed
-Bored/Honed for a 4.030 Piston
-Square Decked to 9.226 and Decked on upper surface so manifold will fit without shaving.
Also note these pictures are before the block was bored/honed



Stock Cats from an 02 Camaro SOLD

Ported/Polished 98-99 TB, its been ported and polished, throttleshaft cut in half, and the outside has been blasted to clean it. The coolant tube on the bottom is broke so if you havnt allready you will need to do the TB coolant bypass mod.

SOLD




Also if anyone is interested (i know, these aren't LS parts, but for the sake of making one post im listing it here.) I have a package deal from my old Kawaski ZX-6R, I would only be interested in selling this as a package deal with all parts: SOLD
-Full Akrapovic Exhaust W/Carbon Oval Tip
-DynoJet PCIII USB
-DynoJet Ignition Commander
-Ivans FI eliminator servo

 

What's the measurements on the radiator? Might could use it for my project car.

 

PM sent! for anyone else interested the radiator measures 28x19x2.5

 

FRC's sold to me

bump for good seller

 

Bump! Make an offer on the turbo, I need it sold so I can purchase the one I need and get this car running!

 

i didn't even see the TB....

when i get my next check i want it if you still have it

 

sounds good, just let me know!

 

what are you asking for the turbo?

 

PM sent !!! BUMP !!! Willing to cut a deal on the turbo !!!

 

ALL parts GOTTA go, MAKE AN OFFER if you want any of this stuff, I'm sick of having it lay around.

 

Priced drop on the turbo, you'll never find a turbo like this with under 500 miles for $900 shipped!!!!

 

do you have any 317 heads?

 

I do, hand ported, but they're milled to 60CC chambers.

 

bumppp

 

bumppp