96 rolling chassis, 10 point cage, ls1 bmr k-member, 9 inch, etc
96 rolling chassis, 10 point cage, ls1 bmr k-member, 9 inch, etc Hey guys, looks like it's time to put the project car up for sale.
It's a 96 Camaro hard top car. Was originally a v6 but that has been removed.
The chassis and parts:
Wolfe 10 point jig-notched chrome moly roll cage (no swingouts)
Wolfe through floor subframe connectors
Wolfe Mini tubs
Starting up front is a brand new BMR LS1 tubular k-member in hammer stone with motor mounts.
Out back is a DSL 9in rearend with 3.50 gears on a trutrac. Hanging this is a set of aluminum double adjustable aluminum LCAs and PHB. They have top notch QA1 rod ends on them. Road race guys work the hell out of these and they hold up to everything that is thrown at them.
The rolling stock is a full set of Prostars to go with it. The fronts are 15x3.5 iirc and have real 7 front runner tires but they are worn. The rears are 15x10 with 275/50/15 MT drag radials on them with plenty of life left.
I have a 16x12x6 core A/W IC I built for the car. I don't have end tanks fabbed up yet so I can make it however you want it. This is a monster IC and will support the cooling needs of most any turbo car.
Also have battery box, relocation wiring, cutoff switch, twin high pressure walbro pumps, and tons of misc parts for the build I can't think of right now.
I'm asking 6k for EVERYTHING out the door obo.
Shoot me a PM or email with any questions. I'm going to try to get pics up this week for everyone if interested. Not really interested in parting it out.
Rear end -not an aluminum center. It's a Strange S casting
LCAs and PHB
Battery box (doesn't show 90% of what's there ie all the cable, the cutoff switch, gold terminal fuse block, etc)
Fuel pumps
It's a 96 Camaro hard top car. Was originally a v6 but that has been removed.
The chassis and parts:
Wolfe 10 point jig-notched chrome moly roll cage (no swingouts)
Wolfe through floor subframe connectors
Wolfe Mini tubs
Starting up front is a brand new BMR LS1 tubular k-member in hammer stone with motor mounts.
Out back is a DSL 9in rearend with 3.50 gears on a trutrac. Hanging this is a set of aluminum double adjustable aluminum LCAs and PHB. They have top notch QA1 rod ends on them. Road race guys work the hell out of these and they hold up to everything that is thrown at them.
The rolling stock is a full set of Prostars to go with it. The fronts are 15x3.5 iirc and have real 7 front runner tires but they are worn. The rears are 15x10 with 275/50/15 MT drag radials on them with plenty of life left.
I have a 16x12x6 core A/W IC I built for the car. I don't have end tanks fabbed up yet so I can make it however you want it. This is a monster IC and will support the cooling needs of most any turbo car.
Also have battery box, relocation wiring, cutoff switch, twin high pressure walbro pumps, and tons of misc parts for the build I can't think of right now.
I'm asking 6k for EVERYTHING out the door obo.
Shoot me a PM or email with any questions. I'm going to try to get pics up this week for everyone if interested. Not really interested in parting it out.
Rear end -not an aluminum center. It's a Strange S casting
LCAs and PHB
Battery box (doesn't show 90% of what's there ie all the cable, the cutoff switch, gold terminal fuse block, etc)
Fuel pumps
Last edited by Speed; Sep 20, 2008 at 02:35 PM.
Trending Topics
Just wanted to throw up an FYI, if someone has an interest in the chassis but not all the parts, let me know. I don't want to part out until the chassis is sold but I'll work with someone on a deal if needbe.
Alright guys, I'm not getting the interest on the whole package but getting tons of PMs and emails about the individual components. So I'll sell the roller with the nine inch and all the wolfe stuff for 3500 bucks plus any shipping/paypal.
I'll sell the chassis without the 9 inch with all the wolfe stuff for 1750. That's selling the clear/green title in hand chassis for 100 dollars of the cost of the wolfe parts. Let's get it done!
I'll sell the chassis without the 9 inch with all the wolfe stuff for 1750. That's selling the clear/green title in hand chassis for 100 dollars of the cost of the wolfe parts. Let's get it done!
Minus everything, it wouldn't roll any more.
The cage/sfcs will be a requirement to go with it. If you've got another rear you can slide under it to get it on a trailer, PM me an offer.
The cage/sfcs will be a requirement to go with it. If you've got another rear you can slide under it to get it on a trailer, PM me an offer.
All PMs replied. Also thought I would mention; if you happen to have a cbr1000rr you are looking at partial trade for, and have an interest here, let me know. We might work something out. 
Ok guys, got a sale pending on the chassis, sfcs, and minitubs. Everything else is up for grabs. A lot of guys have asked me about the rearend, k-member, wheels, etc. If you have an interest, please let me know!
Alright gentlemen, the guy who committed to buying me a car and was supposed to be sending me a deposit won't return my PMs so the car is back up for sale. Chassis needs to sell before parting out but anyone wanting the chassis, lmk. We'll make it work.