I'm trying to fund getting my Formula running again and I need this stuff gone. Pretty much any reasonable offer will be accepted. All the interior parts are off of my 93 Camaro Z28. The valves were bought locally except 1 set of exhaust valves. All of the other stuff came off of my Formula. All prices do not include the cost of shipping or paypal fees. All parts are sold as is. If you'd like any other pictures or have any questions post up or PM me and I'll get you what ever you'd like. I'm also open to a lot of trades. I'm trying to build two cars so I need a lot of things.

Starting off with the random stuff:

6 Nitrous Express SX2 Nozzles. These are a dual stage nozzle. I bought these for a lot more than I'm selling them for. I ended up buying a complete SX2 kit and I am selling these off for a great price. Each one costs $137 new x 6 = $822. I'll take $175



Loudmouth 1: It has one small two inch cut in one pipe where I couldn't get the clamp off. All you'll have to do is slide the down that extra two inches and you are golden. = $250


These are a great deal because you could have a set of 5-16ths guides put in a set of heads, turn these down, and shorten them cheaply to have a super cheap set of titanium valves.
Set of eigth = 5-16ths Del West 2.152 diameter intake valves, 5.715 length $50
Set of eight = 5-16ths Del West 1.602 diameter exhaust valves, 5.595 length. These are coated. $50


Set of eigth = 5-16ths Manley 1.615 diameter, 5.715 length $50


I have two of these. They are 2007 GSXR 750 throttle bodies. Each set comes with 8 injectors, the fuel rail setup, and all electronics. = $35 each



LS1 STUFF

Stock LS1 Fuel Rails = $40
Stock 98 Fuel Injectors = $50


Stock LS1 intake with EGR blocked off = $50


Stock LS1 MAF = SOLD
http://img144.imageshack.us/img144/4769/mafhv2.jpg

 

Stock LS1 lid with baffles = $30


Plastic Parts = $6 each Two shrouds and Two triangles
Steering Shaft Cover = $2.5



93 Parts

Bose front speaker holders = $25


Heater core = $15


Horns = SOLD
http://img71.imageshack.us/img71/653/hornsnb1.jpg

Passenger side airbag = $70


Complete set of seat belts out of my 93 = $50


Windshield washer fluid resevoir = $20


Front Pioneer Speakers. I have no idea what these are, but you can do some research if you'd like. = $25

 

Emergency Brake Handle and spring = $25


Power seat slider including associated wiring= SOLD
http://img122.imageshack.us/img122/3...alguidegy2.jpg

SBC STUFF

Two chrome perimeter bolt SBC valve covers = $10


Edelbrock Performer Pre 86 Intake Manifold = SOLD
http://img147.imageshack.us/img147/9...erpre86cg9.jpg

Mr. Gasket 1932 adapter / space. Quadrajet -> 4150 = $10

 

Bump. I'd like to get this stuff out of my garage. Shoot me an offer and I'll probably take it.

 

ttt...

 

How much shipped to 53806 for those 2 pieces that look gray in the bottom right side?

 

The seat track is it for a camaro? Can you PM me a pic of the harness very interested.

 

Replied to your PM.

Yes, sent you a picture of the harness.

 

Paid!!!!

 

I'll let you know how much shipping is tomorrow when I ship out kclskgl's plastic parts.

Shipping tomorrow morning.

 

Bell Housing

 

^ Don't have one. I sent out the plastic parts today and replied to all PMs.

 

Did the maf and fuel rail come off an f- body?

 

^ Yes, they came off of my 1998 LS1 Formula.

 

will the maf be compatible with a 2000 and up pcm and wiring harness?

 

^ Yes.

 

Edelbrock intake manifold has been sold. Everything else is still available.

 

Power seat slider is pending local pick up tomorrow. Everything else is still available.

 

weres the stock ls1 listed at?

 

Let me know if the seat slider doesn't sell.