Please list your SBC/BBC Project here!

[HotRodder1987]

283 small block, .060 over, balanced rotating assembly, around 10:1 or 10.5:1 compression, stock powerpack heads with 1.94/1.50 valves, 270-280 duration cam, roller rockers, tri power with 3 rochester 2g carbs backed by a Borg Warner T56 and Ford 9 inch with 456 gears and a posi. Going in a 1932 Chevrolet coupe weighing around 1800-2000 lbs

[ats5424]

My family project is our 66' nova bracket car. Blew the 355 sb last season so we had to start from scratch. Bought a 434 shortblock (CNC motorsports) H-beam rods, JE 13.5 pistons, AFR 225 heads, edelbrock super victor ,and Holley dominator 1050. All MSD electronics. waiting to order the cam and timing setup but it should run. The tranny is a TCI turbo 350 with a transbrake and 4.88 gears in a 12bolt. The car ran low 11's-high 10's with the 355. Pics of the car are in my profile.

[DeltaT]

Benn watching this thread for a while - there are some really nice builds here, and some people making sick power!

Here's my 4DR sleeper, "The Grey Ghost":



And here's the current setup I built for it - all the brackets and tubing I designed and fabricated with some help from my friend with a machine shop:



An undershot from the rear to show some serious bits - fuel cell is now undercoated black to make it disappear:



Here's a rear shot - I have kept the exterior of the car deliberately ROUGH:



In the trunk:



660rwhp, 602rwt, 383ci, Vortech T-trim, large Bell FMIC, 75# injectors, Holley Voertec-style single plane (ported by me), Edelbrock E-Tec 200 heads (ported by me), Comp solid roller 230/236 on a 112, 1 3/4" Hooker SuperComps to 3" true dual with H-pipe, Moser Pro 12-bolt, 3.73 gears, Hughes-built 4L80E with TCI T-Com controller, J&S Safeguard Knock Controller, NOS Progressive Controller w/MSD window switch.

New motor in progress, bigger & badder with a YSi head unit.

Keep 'em coming!

Jim

My Site: http://home.mindspring.com/~jim_fisk/id1.html

[mx5.7]

LS1 Tech is an awesome wealth of knowledge!

[347fairless]

[cambirdracing]

http://randymc.smugmug.com/Angleton-...83896929_nfTfW


Wifes car-71 Camaro,489 BBC, Brodix big Brodie oval ports small mechanical flat tappet cam, TH400 and 3.90 gears. 10.80's int he 1/4. Not bad for a girls first race car.

[CaptainDirtymax]

1990 Chevy Camaro RS. i'm in the process of building a 377 Vortec with the full EFI off a '97 Yukon. i'm only looking for around 350rwhp and around 400rwtq. nothing too wild, or else i won't hold traction for auto-x racing.