i recently installed a set of infinity reference components in my fiero, the 5.25" set.
so i figured id upgrade for my camaro and got some infinity kappa 60.9cs's.
my initial plan was to flush mount the tweeters somewhere on the upper door panel, or ideally surface mount them on the triangle piece that covers side view mirrors.
but dayum, theyre huge. i ended up temporarily surface mounting them near the window crank hole, since it wouldnt cause any permanant marks. theyre just really really ugly. i mean really ugly.
has anyone else dealt with these before? think they would fit in those tweeter pods in the other thread?
hrmm.. those are some big tweeters you have.. 'the better to hear with, my dear'.
just ordered those ones.. so. i'll have to figure out what i'm gonna do, was gonna mount them up in mirror area on the doors, but not sure that'll work now. maybe have to order kickpanels.
__________________ 1998 Z28/BGM/A4/3.23/OEM C6 wheels on Pirellis/Pacesetter LT/ORY/!AIR/!EGR/MS3/LS2 TS/160 stat/SLP lid
Idle Video @ http://www.youtube.com/watch?v=wq_HXJRjvkM
Here's where I flush mounted my tweeters , I used a large hole saw drill bit that's just a little smaller then the flush mount cup the tweeter fits in and my dremel, mostly on the back side of the door panel .
__________________ 99 NBM Camaro Z28, M6, pro 5.0, Fluidampr UD pulley, slp lid & bellow, Meziere wp, LS6 intake, "Brownie" ported TB, Catch-can, TWM shift knob, Shorty headers,R.T. Y pipe, Magnaflow bullet dumped, LOTs of suspension mods! Powermaster 200amp alt.,"Big 3", Optima YT. Always a work in progress.
Black 1995 Formula M6.
110K, Hurst Comp Plus shifter, Centerforce clutch, 160*, Manual Fans, TB bypass, K&N, Pacesetter mid-lengths, Cat!, AIR!, BF Goodrich KDWs.
Trying to make the fastest DD for under 5k total!
Here's where I flush mounted my tweeters , I used a large hole saw drill bit that's just a little smaller then the flush mount cup the tweeter fits in and my dremel, mostly on the back side of the door panel .
while i don't like the idea of cutting into my door panels, i definitely like the way these look. my have to consider this.
i like the idea of the tweeters in the pillars, but i dont know if mine will fit.
do you happen to know the diameter and mounting depth of yours?
i also thought about putting them in the door panel in that same spot but i didnt want to make such a big hole and find out theyre too deep or i dont like em.
i just did em up in photoshop. colored the base with the light gray from the door panel and the grille with the color of the stock grille. they look pretty decent like that. anyone know where to get color matched interior paints?
(ive also since fixed the passenger side buttons.)
i have huge tweeters. suggestions? 
