I have a few Double DIN bezels for sale HALF PRICE...
Basically I have five ABS Double DIN Bezels for 1993-2002 Firebird models that are 3/16" off. Look at the bottom of the radio in this pic and you'll see the gap...
You could adjust your radio and not even notice it or if you wrapped it in leather/vinyl you could close the gap as well but I can not sell these to a customer at full price ($100 normally, $75 during a GP) so whomever wants them for $50 shipped just paypal to madelisle@yahoo.com
They will come with all the mounting hardware and instructions as well...
If you can read this thread then feel free to paypal. I will delete after all are sold. Thanks!
Just a heads up to some of you out there who are using a double DIN unit that may be slightly larger then the ISO standard, this would be a perfect solution for that.
Just a heads up to some of you out there who are using a double DIN unit that may be slightly larger then the ISO standard, this would be a perfect solution for that.
Good to know, thanks Kee! Also, did you get my e-mail awhile back? I wanted to completely redo my car's system through you...
Also, if anyone ever needs a custom opening size we can do that for no extra charge on our normal bezels.
Hey Mark sent the money. Im sure even if its off its a great product as always
__________________ http://www.ls1tech.com/forums/image....ine=11925067352001 Black TA A4 Black ZR1's deep dish 17x9 / 17x11
Full suspension/ Tranny cooler and deep pan/ S-3 TB/ Pacesetter Longtubes/ y-pipe/ custom catback/ ftp 85mm Lid/ ASP UD pulley/ 3:23 gears/ LS6 PCV
335HP/345TQ
04 GTO donor motor- Saved by the goat
How big are the holes i will probably need to make it bigger anyway for my touchscreen. I will probably take one in a couple weeks if you still have them when I start working on my carpc.
__________________ 1994 Pontiac T/A 5.7 LT1 Bone Stock(for now)
_____________________
How big are the holes i will probably need to make it bigger anyway for my touchscreen. I will probably take one in a couple weeks if you still have them when I start working on my carpc.
They are 3/16" taller than normal DDs. For future reference we can make the ABS one we sell however custom you want it for no extra price.
If you want to delete HVAC, add gauge holes, make a custom opening for touch screen, whatever. Just send us what you want and for the same price we we'll totally customize it...
Just ordered one of these. One question, does the radio frame behind the bezel require mod for a 2D? I suspect it would. I am liking what I hear about the Pioneer AVH-P3100DVD.
I had to cut the fins that hang down on the top of the radio frame so my pioneer 3100 could fit but this may differ from 2din to 2din. but the bezel covers all of it
__________________ http://www.ls1tech.com/forums/image....ine=11925067352001 Black TA A4 Black ZR1's deep dish 17x9 / 17x11
Full suspension/ Tranny cooler and deep pan/ S-3 TB/ Pacesetter Longtubes/ y-pipe/ custom catback/ ftp 85mm Lid/ ASP UD pulley/ 3:23 gears/ LS6 PCV
335HP/345TQ
04 GTO donor motor- Saved by the goat
I have a few Double DIN bezels for sale HALF PRICE... 
