New Kit for the Birds
#1
New Kit for the Birds
I just finished installing a new conversion kit that allows us to use the 9005/9006 bulb. My car had a kit from Autoptiks (same design as Eurolamps) that was already looking very ruff . Gotta say this is 100% times better in quality and design. This kit allows Firebird owners to upgrade with a better halogen bulb and also allows the installation of an HID setup. These capsules bolt right in just like if you were replacing a blown headlight. You can get these here.....
http://www.lmctruck.com/icatalog/cd/full.aspx?Page=63
part numbers are:
low beam 36-0302
high beam 36-0303
Notice they have a DOT stamp
http://www.lmctruck.com/icatalog/cd/full.aspx?Page=63
part numbers are:
low beam 36-0302
high beam 36-0303
Notice they have a DOT stamp
Last edited by Danny2tek; 01-21-2011 at 08:48 AM.
The following users liked this post:
k3000 (10-11-2021)
#4
TECH Enthusiast
iTrader: (15)
Join Date: Jan 2010
Location: Lawrence, KS
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
http://www.lmctruck.com/icatalog/cd/full.aspx?Page=65
I get a nice runtime error when trying to open this link...
I get a nice runtime error when trying to open this link...
Trending Topics
#8
TECH Enthusiast
iTrader: (15)
Join Date: Jan 2010
Location: Lawrence, KS
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
I'm posting this here for the people that don't visit the Firebird section particularly my sticky about our headlights. I just finished installing a new conversion kit that allows us to use the 9005/9006 bulb. The car had a kit from Autoptiks (same design as Eurolamps) that was already looking very ruff . Gotta say this is 100% times better in quality and design.
Notice they have a DOT stamp
Notice they have a DOT stamp
1. What all is included, specifically does it have different metal bezels that attach the lenses to the flip up mounts, or do you use the stock bezels to retain the lens in place?
2. Cost w/o shipping?
The following users liked this post:
Transamnube (10-26-2022)
#20
Launching!
iTrader: (4)
That looks good what temp are those. I just put ddm tuning 35w 6000k hid's in my fogs last week; I like em. BTW thanks for this info I just put my lmc truck housings in today they fit good and look way better than the eurolights housings I replaced them with gonna order my hid's for the lows tonight.