Post pics of your garage / shop - Page 22

00silverz28 · 02-27-2009, 10:00 PM

I noticed the wheel earlier when I looked at it. Thats a pretty cool idea.

litemup02 · 02-27-2009, 11:05 PM

^^X3 i have a WS.6 wheel with a chunk missing from the bead i'm gonna use for a hose reel. Seen it in hot rod awhile back...

The Alchemist · 02-28-2009, 06:39 AM

I used a split 19" HP evo wheel and hung it on my wall to store my garden hose.

After raising my ceiling last fall, I ran out of time before winter came, so this spring I'll finish spackling and get it primered and painted. I still haven't decided on what I'm doing with the floor.

SPOOOOLIN · 02-28-2009, 08:42 AM

Thats an old Cregar SS 5 spoke I used to have on my S-10 (don't ask), I still have the rest of them in the shed out back

SPOOOOLIN · 02-28-2009, 07:01 PM

HERE IS THE SHOP/ TOOLS THAT I CURRENTLY OWN, I NEED A BLAST CABINET

THIS IS MY OLD HOUSE RECIEVER... HARMON KARDON AVR 120 I RUN IT THROUGH MY LAPTOP WITH SIRUS RADIO OR MY BLACKBERRY IT WORKS VERRY WELL...

AND THE HEAT... CAN'T FORGET THE HEAT...

POOR LT1... JUST SITTIN THERE WAITING ON PARTS

MY PARTS WASHER AND SANDBLASTER

94zgreenmachine · 03-01-2009, 08:49 PM

Forever working on the car......
30x26 with most of the room for the car and just enough to squeeze the truck in without scratching it up...
From the passenger side of the car to the wall with the bench is about 7' so I have a little room...

Y2KFirehawk · 03-03-2009, 05:16 PM

2 car attached garage (20x20) I gotta figure out a more efficient use of the space... I wish it was bigger!! (My wife's truck is normally parked in there too.)

6t9ls1 · 03-15-2009, 10:11 PM

here a bad pic of my recently purchased shop.
http://viewmorepics.myspace.com/inde...ageID=28748898

1sick'98WS6 · 03-16-2009, 01:28 PM

Here's where i do work

litemup02 · 03-16-2009, 02:55 PM

^^Just couldnt wait to move your stuff in before you painted it... could ya? lol Thats a nice set up you have...pure jealousy

and i see the roll up doors free up your space for the lift...good idea

SPOOOOLIN · 03-16-2009, 07:53 PM

Gotta take the drop light off the hood before raising the car...

SPOOOOLIN · 03-16-2009, 07:53 PM

Nice shop... What does it look like form the outside... I am looking into a steele building now

1sick'98WS6 · 03-20-2009, 03:53 PM

lol, I like to leave that drop light on there when I raise the car.

heres the outside picture you asked about and a picture of the new swamp cooler and duct work

Heater would do me no good here.. lol

litemup02 · 03-21-2009, 12:47 AM

Nice C-10

3800RS · 03-21-2009, 09:55 AM

Quote:

Originally Posted by 94zgreenmachine

Forever working on the car......
30x26 with most of the room for the car and just enough to squeeze the truck in without scratching it up...
From the passenger side of the car to the wall with the bench is about 7' so I have a little room...

where did u get that poster from ??

Tricked-Out-Toy · 03-27-2009, 02:38 PM

Heres mine right after the lift install and the epoxy floor coating. its uusually full of tools and atleast to cars in there and another in the paint booth next door...

Best pic I have of the outside lol

budhayes3 · 03-27-2009, 08:51 PM

You guys have some real nice shops!

Loadre · 03-29-2009, 08:38 PM

Quote:

Originally Posted by 1sick'98WS6

Here's where i do work

What are the dimensions on that building. Looks like something very similiar to what I want to do. Good thing my girlfriends dad has a steel building company.

mebuildit · 04-05-2009, 07:18 PM

Here are some early pics of my addition and some of the equipment that I have. I'm in the process now of adding another sub panel to the garage with T5 lighting, air lines, electrial boxes everywhere and if possible more equipment. Drywall will be coming shortly so I'll be pretty happy once that is all done.

mebuildit · 04-05-2009, 07:22 PM

Here are some more pics.