98 Firebird Trans AM, 385ci supercharged, very low miles
12-06-2009, 01:39 PM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2009
Location: San Diego, CA.
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
98 Firebird Trans AM, 385ci supercharged, very low miles Year: 1998
Make: Pontiac
Model: Trans Am
Price: $15000
Mileage: 7400
Private or Dealer Listing: Private Listing
Location (State): CA
Color: Black
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
1998 Pontiac Firebird Trans AM, original owner, car bought new in July 1998, and has been parked indoors/garaged since new. Vortech supercharged 385ci iron-block engine build by Agostino Racing Engines. Best dyno pull 702 RWHP. Car is registered in AZ. and has 7400 miles on it, and new engine has about 1000 street miles, never raced. Upgraded Vortech 12psi supercharger (chrome), NX wet kit with 15 lb. bottle, custom aluminum intake manifold, ECU custom programming by Ed Wright (fastchip.com), racing exhaust (coated long tubes, 4" Mufflex, custom fabricated dual rear exhaust, sounds incredible!). Custom paint by Jack Williams, car is black with ghost flames down the sides and on the hood (see pics). Tons of other upgrades including suspension, roll cage, Centerforce clutch, 17" OZ Racing wheels, Nitto Drag radials in back, Bridgestone S02 Pole Position tires in front. Extra parts included: Powerslot rotors and brake pads, McLeod twin disk clutch, new pair of BFG 315 Drag Radials, more. Car is in excellent condition inside and out. $15,000. Send PM if interested.
Some pics:
http://i45.tinypic.com/2n1v1ww.jpg
http://i45.tinypic.com/m8fti1.jpg
http://i49.tinypic.com/2uy61r7.jpg
Last edited by Sheyster; 04-12-2010 at 09:56 AM.
12-06-2009, 07:30 PM
#3
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2009
Location: San Diego, CA.
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
The rear has 3.73 motive gears and a TA girdle, BW 6-spd trans is stock. I was planning to replace both when they broke, but they never did!
The car also has an ACPT carbon fiber drive shaft and full G2 setup (sway bars, SFC's, torque arm).
The car also has an ACPT carbon fiber drive shaft and full G2 setup (sway bars, SFC's, torque arm).
12-06-2009, 09:03 PM
#7
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2009
Location: San Diego, CA.
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
I'll post more pics tomorrow. I have some dyno sheets as well, will find them and scan them.
Here is a video with the car on the dyno with the original 346ci motor. It pulled over 600 RWHP on that dyno run.
http://www.thedynoshop.com/pages/videos.htm
(The video that says 600 HP Firebird).
Here is a video with the car on the dyno with the original 346ci motor. It pulled over 600 RWHP on that dyno run.
http://www.thedynoshop.com/pages/videos.htm
(The video that says 600 HP Firebird).
Trending Topics
12-07-2009, 10:59 PM
#8
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2009
Location: San Diego, CA.
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
More pics. It rained all day today so I wasn't able to take interior pics. The interior is pretty much perfect, down to the original (almost spotless) floor mats!
http://i48.tinypic.com/20u691e.jpg
http://i47.tinypic.com/2s8lik1.jpg
http://i46.tinypic.com/2bv3t4.jpg
http://i48.tinypic.com/20u691e.jpg
http://i47.tinypic.com/2s8lik1.jpg
http://i46.tinypic.com/2bv3t4.jpg
12-11-2009, 11:13 AM
#11
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2009
Location: San Diego, CA.
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
More pics:
I also have a brand new pair of wheels for slicks/ET Streets, still in the box. I'll throw those in with the sale.
Will post interior pics when I get a chance! FWIW, It's perfect/like new inside. There are gauges on the driver's side pillar mounted in a housing for SC boost and fuel pressure.
I also have a brand new pair of wheels for slicks/ET Streets, still in the box. I'll throw those in with the sale.
Will post interior pics when I get a chance! FWIW, It's perfect/like new inside. There are gauges on the driver's side pillar mounted in a housing for SC boost and fuel pressure.
Last edited by Sheyster; 12-11-2009 at 11:23 AM.
12-11-2009, 08:07 PM
#14
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2009
Location: San Diego, CA.
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Yes that is correct! Jack Williams Autobody in El Cajon did the work. They stripped the clear, did the flames using ChromaLusion paint and re-sprayed the clear. They did an amazing job! The clear on the car now is much nicer than the original.
12-12-2009, 01:00 PM
#17
hey man you can see your house address in one of the pics, you might want to take that pic down you never know who is creeping around the internet looking for stuff like that looking to steal peoples cars. I am willing to bet it happens quite a bit.
Love the car by the way.
Love the car by the way.
12-13-2009, 01:22 PM
#18
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2009
Location: San Diego, CA.
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the tip! That pic was at my old address, I've since moved so I won't bother to blank it out. 
Thanks for the compliments guys, it really is a great looking/performing car for a great price too.
I want to add that I've gotten an offer for a trade plus cash. I have other cars so I'm only looking to sell at this time.
Thanks for the compliments guys, it really is a great looking/performing car for a great price too.
I want to add that I've gotten an offer for a trade plus cash. I have other cars so I'm only looking to sell at this time.
