Bought the car a few months ago and didn't realize the bills would pile up so soon! Put 4 brand new tires on it a few weeks ago. LOWERED TO $11,000
Here are the specs:
Engine: Built at Craig Caulk Racing Heads in Houston, TX.
Forged 383 Rotating assembly, LS6 Block
JE pistons, Forged
Eagle Crank, Forged
Eagle Rods, Forged
241 Heads Milled and Ported
Comp 918 Valve Springs
Cromoly pushrods
Manley Valves
Comp 232/236 .574 .578 112 LSA
I have the receipt for headwork, and Cam Card.
External Engine:
Fast Toys 85mm Lid
Stock MAF
Ported TB
Hooker Stainless LT headers
True Duals with Glass Packs
FIC flow matched 42# @ 3 bar injectors
NGK TR-55 plugs
MSD Wires
K&N Filter
Free Mods
I have the receipt for the Exhaust work, and Injectors. I also have the flow chart for the injectors.
Tranny:
Spec 3+ Clutch with Stainless flywheel
Bulletproof McLeod Bellhousing
Carbon Fiber Syncros
Billet Shift keys
Bronze fork pads
Brass shifter bushing
Steel Shift fork
B&M ripper shifter
I have the receipt for the tranny parts and labor. The tranny is a stage 2 that will hold 700HP.
Spohn Adjustable Heavy Duty torque arm
BMR Sub frame connectors
BMR tubular K member
BMR Lower control arms
Stereo:
Kenwood MP3 player
Rockford Phosgate 1500W Amp
2 JL 10" WO subs with custom box
Guy I bought the car from said it dynoed right at 430hp and 428 ft. lbs. before he added a few things to the car. It should be right at 450 HP now. Car runs damn good and has no problems. Only thing that I can think needs to be done is setting the pinion angle which is very quick. New tires have around 1000 miles on em. Paint is not perfect but looks damn good for an 8 year old car. Car sounds badass and turns heads wherever I go. My email is airnathan012@gmail.com. Let me know if you are interested.
Last edited by airnathan012; 11-21-2009 at 01:16 AM..
How funny life is. I almost bought this car. I gave a deposit and all. Have you made any mods since you bought it from Cory? Are you firm on 13k, you bought it for less than that. Im interested in this car, again, lol.
has the car been wrecked?
in the old post of the same car for sale the passenger side airbag looks like it been deployed............the flap on the dash looks funny
__________________
98 Ws6, intake, cutout, comp cam, hardened pushrods, gold dual coil springs, Monster Level 3, FAST 90mm TB, FAST intake, TTIIs, Hooker LTs, and a little bit of JUICE.
2000 Ws6, boltons...TOTALED. Thnks to a drunk!
How funny life is. I almost bought this car. I gave a deposit and all. Have you made any mods since you bought it from Cory? Are you firm on 13k, you bought it for less than that. Im interested in this car, again, lol.
So that was you? Small world huh. When I bought it, a bolt from the pressure plate came loose and put a damn hole in the bell housing on my way home. So I put the mcleod bellhousing in it with a brand new spec 3+ clutch, flywheel was fine. The torque arm was also bent so I replaced it with a HD adjustable spohn. Fog light switch was broke, fixed that. Lid and MAF were loose, fixed that too! Has a remote clutch bleeder on it now too. Also replaced the rear main seal, which was leaking too! Driveshaft was out of balance and had shitty welds on the yoke, so I replaced that with a stainless steel 2.5" shaft that will not break. Car has been gone through by me and my mechanic and runs great with no problems. Like I said the only thing that needs to be done is have the pinion angle set, which I haven't had any time to do. Ive put a couple grand in the car since ive got it but it sure is fun! Just changed the oil about 500 miles ago and got new tires put on as well. Also clay barred and polished the car up and got rid of a lot of the previous scratches it had. $13K is just the starting price...Id like to get atleast $12K outta the car.
Last edited by airnathan012; 10-22-2009 at 03:12 PM..
has the car been wrecked?
in the old post of the same car for sale the passenger side airbag looks like it been deployed............the flap on the dash looks funny
Maybe it was the camera angle...there are no signs that the car has been wrecked to me.
Hey, selling the car so soon? The torque arm was bent? That thing was brand new, seriously only had a couple hundred miles on it. Do you still have it? The car has never been wrecked, the guy that had it before me went really cheap on some stuff and had completly torn the dash apart for the stereo and crap that I removed, thats why the dash looked a little funky.
That car should easily put down 450
__________________ 383 LS6 | 12 Bolt | BMR
430/430
12.6 @ 115 ^No longer accurate, but the only solid info I have.
Hey, selling the car so soon? The torque arm was bent? That thing was brand new, seriously only had a couple hundred miles on it. Do you still have it? The car has never been wrecked, the guy that had it before me went really cheap on some stuff and had completly torn the dash apart for the stereo and crap that I removed, thats why the dash looked a little funky.
That car should easily put down 450
Can't afford it man, got too many bills and got school to pay for!
2001 Trans Am WS6 383 Stroker Black t56 
for sale 04 silverado
