94 RX7 Touring w/ 02 LS1/T56 swap $14,500 OC, CA
#1
94 RX7 Touring w/ 02 LS1/T56 swap $14,500 OC, CA
Alright, so here's the deal. Bought the car from some guy in Fresno area, drove it about 20 minutes, it died. It had a short in the ecu and a wire burned competely through the harness. I have fixed the wire, now it has communication through an obdII and everything else, works fine just the car gets no spark. I have tried all possible routes except 3, and I have just ran out of patience for this car, so if someone has patience and a place to work on it--- your gain my huge *** loss. The only 3 things left to check for no spark would be the coil packs (doubtful) CPS/CPS or the Ecu just may have fried the ICM circuit. I don't know and I dont really care at this point. The car is cheap enough and if you dare to offer me less your a moron. Don't take it as being rude, I just don't like dealing with tire kickers. I will entertain trades for 98-02 SS's only--- must be lower than 60k miles and modded/stock is fine.
CLEAN TITLE PEOPLE--- VIN- JM1FD3339R0301966
94 Touring Edition Rx, original 5 speed car.
If you are genuinely interested, I suggest you call me as soon as possible, seeing as I have it listed on a few other sites.
(949) 355-3395.
Here are some pictures--- it's very dirty, and the center console is just off, not broken... lol. The front fumper is off for towing purposes since it's way too low to tow. If you have any other questions, please do NOT hesitate to call me. Thanks for the interest!!!
CLEAN TITLE PEOPLE--- VIN- JM1FD3339R0301966
94 Touring Edition Rx, original 5 speed car.
If you are genuinely interested, I suggest you call me as soon as possible, seeing as I have it listed on a few other sites.
(949) 355-3395.
Here are some pictures--- it's very dirty, and the center console is just off, not broken... lol. The front fumper is off for towing purposes since it's way too low to tow. If you have any other questions, please do NOT hesitate to call me. Thanks for the interest!!!
#6
Launching!
iTrader: (1)
Originally Posted by 99SSinOC
Only way I have found to fit the motor in this car is Brian's kit. Goodluck without it!!
#7
Give us some specs on the car. What parts were used in the conversion, was the rearend upgreaded, pics of the whole. I wish I was headed out to Ca because I would stop and take a look at it because this project is on my list.
Trending Topics
#8
Staging Lane
iTrader: (8)
Join Date: Sep 2005
Location: Corning, Ca
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Nicely done conversion. Are you so fed up with it you don't want to finish troubleshooting it? Up and running Fd LS1's go for almost 20k. List the thing on Torquecentral, I've seen quite a few sell on that site, also try RX7club.com in the other engines section.
#11
On The Tree
iTrader: (5)
Join Date: Aug 2005
Location: NY
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Wow, if I had seen this prior to pulling the motor in my car I'd be ALL over it!! I've got more than that sunk into my conversion thus far with a bit more to spend on little stuff (and I already had the car before I began)