FS: 86 Conquest TSi
02-11-2009, 01:46 AM
#1
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Minden, LA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
FS: 86 Conquest TSi **Pics Updated** Hey guys I have owned this car for about 5 years now. Lot of time and money in it. Its a black 5 speed with black velour interior. Power everything you know the drill.
51,xxx miles
Mods:
TEP downpipe
Secondary air removed
Balance shaft eliminated
Caravan (non jet) head
Removed a/c hardware
3-wire o2
The good:
Rebuilt bottom end
Rebuilt turbo
New fuel pump
New injectors
Decent interior... whats not can be replaced with parts from the other car.
The bad:
Cracked head...
Ding in drivers door
Front airdam taken off due to DAMAGE!!!
No radio
I have way too many cars so this one will be the first casualty. With a new head this car will run 13.70s or so on 10-12psi. Im building an 88 with a small block so I dont need this one. Car will come with a truckload of parts from the 88 that will fit the 86.
Some of the parts:
Intake manifold
Stock turbo
Radiator
Intercooler
Fans
Seats(good leather seats)
All Trim panels
... pretty much everything that makes the car minus the body.
Really dont care what I get for it... I told my wife I would sell my first love. I may get a bit emotional when this one goes so it will be better if im at work when it goes down.
First to offer 1000 takes it. Car only needs a head. Head gasket on the car is BRAND new and can be reused.
51,xxx miles
Mods:
TEP downpipe
Secondary air removed
Balance shaft eliminated
Caravan (non jet) head
Removed a/c hardware
3-wire o2
The good:
Rebuilt bottom end
Rebuilt turbo
New fuel pump
New injectors
Decent interior... whats not can be replaced with parts from the other car.
The bad:
Cracked head...
Ding in drivers door
Front airdam taken off due to DAMAGE!!!
No radio
I have way too many cars so this one will be the first casualty. With a new head this car will run 13.70s or so on 10-12psi. Im building an 88 with a small block so I dont need this one. Car will come with a truckload of parts from the 88 that will fit the 86.
Some of the parts:
Intake manifold
Stock turbo
Radiator
Intercooler
Fans
Seats(good leather seats)
All Trim panels
... pretty much everything that makes the car minus the body.
Really dont care what I get for it... I told my wife I would sell my first love. I may get a bit emotional when this one goes so it will be better if im at work when it goes down.
First to offer 1000 takes it. Car only needs a head. Head gasket on the car is BRAND new and can be reused.
Last edited by WongBob; 03-03-2009 at 02:41 AM.
02-11-2009, 02:00 AM
#2
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Minden, LA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Or start making some offers. No insults please... this is my baby were talking about. Ill get some pics up within a week. Just imagine your average widebody Conquest black on black until then.
02-11-2009, 02:43 AM
#3
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Minden, LA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
This is all I have... these pics were on my phone. Im at work so Ill try to get some body and interior pics up soon.
These are from the day I did the top end set. Last pic is what it looks like now. Its all complete and runs, but isnt strong and shouldnt be ran until it gets a new head.
These are from the day I did the top end set. Last pic is what it looks like now. Its all complete and runs, but isnt strong and shouldnt be ran until it gets a new head.
