FS: 03 Cobra F1 Procharger, Lawless 5.1, Fully Built!!

 
Thread Tools
 
Search this Thread
 
Old 04-01-2009, 12:51 AM
  #1  
Teching In
Thread Starter
 
vegasse's Avatar
 
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default FS: 03 Cobra F1 Procharger, Lawless 5.1, Fully Built!!

2003 Mustang Cobra
28k Miles
No accidents, clean title
Freshly painted in flat black including all door jams, etc….
The car has NEVER been on the road with the new paint job
Headlights, Taillights, and markers professionally blacked


Chassis:
Certified 12pt WolfCraft 8.5 cage powdercoated black
Stock seats and interior
Brand New Black Carpet
VIS Cobra R Cowl Hood (latches in factory location)


Engine:
Fully built 5.1 Stroker by Lawless Engines
Fresh Core
Fully Bored
Honed with Torque Plates
Line Honed
Balanced + Pin Fit
Ford V8 4.6 LT Pistons
4340 Crank w/3.750 Stroke
JE Straight Wall Pins
Custom Performance Coated Rod Bearings
Clevite Main Bearings
ARP Main Studs

380cfm Lawless ported heads
(These heads are 100% hand ported with over 100 hours into them. They became the blueprint for Lawless’ full on CNC race head.)
Brand New Cores
Competition Port and Polish
Five angle valve job
Beehive valve springs
135.6 20 degree valves
116.3 30 degree valves
Ferrea Competition Valve Seats
Ferrea titanium retainers
Ferrea valve keepers
Ferrea spring seats
Ferrea spring locaters
Ferrea valve guides
ARP Head studs
Custom Grind Cams + Retainers
Ford 4.6 Head Gaskets
Fluidyne radiator
Maximum Motorsports Oil Filter Relocation
F1 Procharged Cog Driven


Cooling:
Virtual Works Racing Custom Race Intercooler
Virtual Works Racing Custom Overflow Can
Virtual Works Racing Custom Polished IC Piping


Trans:
D&D Performance T56 w/Billet shafts + cryo’d gears
Mcleod Street Twins Clutch
Upper Adjustable Clutch Quadrant
B+M Short Throw Shifter


Suspension:
Maximum Motorsports Complete K-Member Package
MM Tubular K-Member Brace
MM Front Control Arms
MM Urethane Bushings
MM Caster/Camber Plates
MM Coil Overs w/Bilstein Struts
MM Spherical Washer Rack Bushings
MM Lowered Sway Bar End Links
HyperCoil Coil Over Springs


Exhaust:
Kooks 1 3/4x3' Headers
Jet Hot Coating on Headers
Kooks 3 inch X-Pipe


Electronics:
Weapon-X Xcop Ignition Coil Set
Diablo Computer

Fuel System + Intake:
Sullivan Performance SP Intake Manifold
Accufab Single Blade Throttle Body
Lethal Performance/Fore precision billet fuel hat W/ SINGLE 8an line
Twin Ford GT Super Car Fuel Pumps
Complete Sullivan Fuel System with 8an line front to back all with black earls an fittings
Aeromotive A1000 Fuel Pressure Regulator
Aeromotive 10AM Port Fuel Filter
Sullivan Polished Fuel Rails
Sieman Deka 63lb Flow Matched Injectors
Lethal Performance Dual Fuel Pump Driver Modules

Misc:
Flamong River Steering Shaft
Bullet Wheels, painted satin black
Goodyear F1 tires front and rear (brand new)


I have ALL receipts for the build. To replicate this car will cost nearly $100,000 with the price of the car and complete color change. The engine ALONE will cost $25,000 to duplicate from Lawless.

This car has never been FIRED. Everything on the car is 100% brand new with all receipt documentation of every part on the car. The trans, engine, blower, suspension, clutch, fuel system, etc.....are 100% virgin at this point. The car WILL fire and hit the dyno for anyone who is very serious about buying it.

I will have pictures up in a matter of a couple days. Anyone who questions the fact that I have no posts, feel free to search Supraforums.com, Evolutionm.net, or Lambopower.com under the ID VegasSE and that should be enough.

Make an offer on the car. Partial trades will be entertained, as will parting the car out if the item you are interested in is the ROLLER or the Engine. Please don't ask me to part the car out if you aren't inquiring about the engine or the roller.


Cash price = $45,000obo


Email me at ttgallardo@gmail.com

















Last edited by vegasse; 05-04-2009 at 09:07 PM.
vegasse is offline  
Old 04-01-2009, 01:10 AM
  #2  
Teching In
Thread Starter
 
vegasse's Avatar
 
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

FYI, I would be willing to entertain trades for clean title WS6 6-Speed cars with under 50k miles and fully built engines plus substantial cash on your end.
vegasse is offline  
Old 04-02-2009, 01:55 PM
  #3  
Teching In
Thread Starter
 
vegasse's Avatar
 
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm really pretty open to any offers on the car whether that be parting it out if someone wants the engine or the roller, partial trades for a stock low mileage Cobra plus cash, or simply a cash offer on the car. I'm willing to listen to any REASONABLE offer anyone has.

I should add, no I don't want to trade for an 88 fox body, a honda, any motorcycles, 100k mile cars, etc.....If I'm going to trade the car in part, I want to receive a high quality, low mileage vehicle of value in return with cash. If anyone has a serious offer, I'll listen, but please don't try to trade me ragged out junk.
vegasse is offline  
Old 04-02-2009, 02:59 PM
  #4  
Staging Lane
iTrader: (2)
 
polen21's Avatar
 
Join Date: Dec 2006
Location: Springfield, Illinois
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Default

forums rules say post a price. maybe im dumb and missed it but i did not see one
polen21 is offline  
Old 04-02-2009, 03:33 PM
  #5  
Teching In
Thread Starter
 
vegasse's Avatar
 
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by polen21
forums rules say post a price. maybe im dumb and missed it but i did not see one
VERY open to partial trades so pm or email me offers. Cash price 45k obo.
vegasse is offline  
Old 04-03-2009, 02:58 AM
  #6  
Teching In
Thread Starter
 
vegasse's Avatar
 
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

This is the best I can do for you at the moment. Wrong rims, hood off, no IC piping on the car yet. Not a very good indication of how it looks finished, but the only pic I have of the car at this moment.


vegasse is offline  
Old 04-06-2009, 12:10 PM
  #7  
Teching In
Thread Starter
 
vegasse's Avatar
 
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

Info updated.
vegasse is offline  
Old 04-09-2009, 01:43 AM
  #8  
Teching In
 
88gt306's Avatar
 
Join Date: Dec 2008
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default Vegas...

Ive seen you in other forums as well as here...was just wondering if you ever go to Cars and Coffee on Saturdays?

-Brett
88gt306 is offline  
Old 04-10-2009, 02:49 PM
  #9  
On The Tree
iTrader: (2)
 
LT1_T/A's Avatar
 
Join Date: May 2006
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts

Default

I'll trade cars with you!!!! lol j/k man that is a really nice car! I saw your car collection on another forum, sick cars!! Why are you selling it already you havent even finished it and had a chance to enjoy it.....
LT1_T/A is offline  
Old 04-13-2009, 01:29 AM
  #10  
Teching In
Thread Starter
 
vegasse's Avatar
 
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 88gt306
Ive seen you in other forums as well as here...was just wondering if you ever go to Cars and Coffee on Saturdays?

-Brett
Generally no. Much too early in the morning for Saturday's in Vegas IMO.


Originally Posted by LT1_T/A
I'll trade cars with you!!!! lol j/k man that is a really nice car! I saw your car collection on another forum, sick cars!! Why are you selling it already you havent even finished it and had a chance to enjoy it.....
I have something else cooking that I'd like to pick up asap.
vegasse is offline  
Old 04-15-2009, 09:44 PM
  #11  
Teching In
Thread Starter
 
vegasse's Avatar
 
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

Pics of the K-Member added.




vegasse is offline  
Old 04-16-2009, 05:31 PM
  #12  
Teching In
Thread Starter
 
vegasse's Avatar
 
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

Here are the pics of the rims on the car as well as a decent shot in how it sits from the rear. Obviously I'll post more pics with the hood on, IC on, and the car all cleaned up and finished. Give me a few days to get the hood on and done.





vegasse is offline  
Old 04-17-2009, 06:00 AM
  #13  
TECH Apprentice
 
BADMOON's Avatar
 
Join Date: Feb 2009
Location: A DEN
Posts: 365
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by vegasse
Generally no. Much too early in the morning for Saturday's in Vegas IMO

I have something else cooking that I'd like to pick up asap.


Man who did your paint that is a beautiful job and badass car I would love to have. Probably gonna be hard to sale for that much without track times and breakin the motor in . GOOD LUCK
BADMOON is offline  
Old 04-17-2009, 11:56 AM
  #14  
Teching In
Thread Starter
 
vegasse's Avatar
 
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by BADMOON
Man who did your paint that is a beautiful job and badass car I would love to have. Probably gonna be hard to sale for that much without track times and breakin the motor in . GOOD LUCK
That's why I'm finishing the car and will have it running, tuned, with dyno numbers, etc.....It's not a drag car, it's a street car, so if someone would like to buy it and take it to the dragstrip, that's their prerogative. I only build street cars, not trailer queens.
vegasse is offline  
Old 04-18-2009, 07:39 PM
  #15  
OWN3D BY MY PROF!
iTrader: (176)
 
Beaflag VonRathburg's Avatar
 
Join Date: Feb 2006
Location: Jax Beach, Florida
Posts: 9,149
Likes: 0
Received 3 Likes on 3 Posts

Default

What color is the car? It looks satin to me, but I'm partially color blind and really bad with colors.
Beaflag VonRathburg is offline  
Old 04-20-2009, 09:53 PM
  #16  
Teching In
 
WS Sicks's Avatar
 
Join Date: Mar 2009
Location: snellville ga
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
Default

25k cash. you might want more idk... i just figured id make an offer.
WS Sicks is offline  
Old 04-20-2009, 09:55 PM
  #17  
Teching In
 
WS Sicks's Avatar
 
Join Date: Mar 2009
Location: snellville ga
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
Default

and what where you building this car to make hp/tq wise?
WS Sicks is offline  
Old 04-21-2009, 02:08 AM
  #18  
Teching In
Thread Starter
 
vegasse's Avatar
 
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by WS Sicks
25k cash. you might want more idk... i just figured id make an offer.
45k obo is about where I'd be at. It's a giveaway at that price. 25k would have to be without engine, blower, or intercooler set up.

Originally Posted by WS Sicks
and what where you building this car to make hp/tq wise?
It should easily make 800-850rwhp on the small pully. If you wanted to put the big blower pully on it would make around 1200rwhp without issue.
vegasse is offline  
Old 04-21-2009, 02:41 PM
  #19  
Staging Lane
iTrader: (2)
 
polen21's Avatar
 
Join Date: Dec 2006
Location: Springfield, Illinois
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Default

you have the sickest collection of cars ive ever seen
polen21 is offline  
Old 04-22-2009, 02:15 PM
  #20  
Teching In
Thread Starter
 
vegasse's Avatar
 
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by polen21
you have the sickest collection of cars ive ever seen
I appreciate it. I have a couple other projects going on, so I need to make some space.
vegasse is offline  



All times are GMT -5. The time now is 08:40 AM.