Effeective Immediatly, Total Performance Engineering in Las Vegas, Nevada is looking for 2 members to sponsor for the remainder of 2009 and 2010, with FREE performance product. (Las Vegas, and surrounding areas only)
We have developed an engine program that rivals some of the best in the business. But we have mainly kept it fairly low key, and only for a select group of owners. We are not a mass motor building shop. We prefer individual builds, that allows the control of every aspect of the build. But recently, we have devised a program that can provide motors to you guys without comprimising cost, or quality.
What are we offering:
We are looking to sponsor 2 members with a FORGED LS Based shortblock. This will be a 100% free shortblock to the recipients. We will go over the details with the member once their chosen. Our goal is to introduce these motors to the public. But not by dyno queens. We want racers to prove these motors. We feel that the only way to validate our capabilities, is to allow the member to take the car to the track, and beat the shit out of it. Then, when a potential customer asks how good they are, we can direct them to our racers. "Total Performance Motorsports" will dominate the city.
This program is being worked on now, so the sooner we get this handled the better off you are. The approved sponsored vehicles will be able to discuss with us, as to the compression ratio of the motor, and the requirements to make it work for their application. So if your build requires an 8.5:1 cr, that is what we will build you.
What do we expect:
We do not want some show car, or dedicated highway racer (unless you race it as well). We want cars that RACE!!! We dont care if its got 20 grand in paint, and bare metal.. I do not care how pretty the car is, or how expensive your wheels are. If you are hard core, and your car is 12 different colors, we want you. I would prefer someone who spends all of his money on racing. Notice I didnt say "Cheap ass". We do not want a vehicle that is unsafe, or put together with hacked up parts. We expect that the chosen members, will take pride in their racing abilities, and demonstrate that through their craftsmanship.
We also expect the chosen members to regularly race at the local events, and post their results. Wether it be a test and tune, or a sponsored event, we would like you there.
Please send any info you deem necessary to be chosen, along with pictures of your vehicle to: Jeff@corvettetuners.com.
Or you can drop the info off at our shop at 7055 Speedway Blvd E-106, LV, NV 89115. We are the closest shop in the city to the Las Vegas Motor Speedway. We are literally a few hundred yards away from the drag strip.
We look forward to hearing from you, and will post our decision in the next few weeks.
Most importantly, be looking out for some unbelieveably affordable motors that everyone can afford to run.
Were are very serious about this. I spent over an hour on the phone with Callies today wrapping up the details of the motors. We will be using their product quite heavily. So dont think your gonna get a bunch of probe pistons, or PAC rods. We'll leave that for the hack shop next door to us.
Keep the emails coming
BTW Guys, We have an 800sqft room inside our shop that were converting in to a pool hall/lounge. We're also installing a blackjack table.. We think were gonna start playing blackjack after test-n-tune and midnight mayhem events..
Were are very serious about this. I spent over an hour on the phone with Callies today wrapping up the details of the motors. We will be using their product quite heavily. So dont think your gonna get a bunch of probe pistons, or PAC rods. We'll leave that for the hack shop next door to us.
Keep the emails coming
BTW Guys, We have an 800sqft room inside our shop that were converting in to a pool hall/lounge. We're also installing a blackjack table.. We think were gonna start playing blackjack after test-n-tune and midnight mayhem events..
Get me wasted, and I might start bettin motors..
Thanks for the opportunity. What do we have to put up against your motor bets? Have any idea when you guys will be choosing the canidates?
Mo
__________________
GM MUSCLE President
1998 Camaro Z28
Full bolt-ons and cammed 1982 Camaro Z28 Pace car SOLD
Exhaust and B&M shifter 1992 Toyota Paseo
"Driving a fast Honda is alot like coming out of the closet... at first everyone is shocked, but in the end your still a fag!"
A hot girlfriend will do. As long as my wife it ok with it..
Actually, provided we get enough candidates, we are hoping to choose the week of July 13th. This way, we can order the pistons, and have the motor ready by the end of the month. We want the cars on the track as quick as possible.
Quote:
Originally Posted by Wicked_muscle
Thanks for the opportunity. What do we have to put up against your motor bets? Have any idea when you guys will be choosing the canidates?
A hot girlfriend will do. As long as my wife it ok with it..
Actually, provided we get enough candidates, we are hoping to choose the week of July 13th. This way, we can order the pistons, and have the motor ready by the end of the month. We want the cars on the track as quick as possible.
Sounds good I'll see if I could get an ex-girlfriend to be down to be thrown in as a bet . Sounds good about the dates. You guys have some very nice mills, turning machines, CNC equipment.... I would love to have a couple at my buddy's shop/work that have some tool changers. Too damn expensive and work is slow right now though.
__________________
GM MUSCLE President
1998 Camaro Z28
Full bolt-ons and cammed 1982 Camaro Z28 Pace car SOLD
Exhaust and B&M shifter 1992 Toyota Paseo
"Driving a fast Honda is alot like coming out of the closet... at first everyone is shocked, but in the end your still a fag!"
I am up in Mass but travel all over the NE racing my GTO, atco, englishtown, New England Dragway, Cecil County, Bradenton, FL once a year, the Hot Rod Drags in North Carolina in August. Not sure if you'd be interested, but i'll send ya an email anyhow...
__________________ 06 GTO M6
Mods: Some stuff to make it go faster, nothing to make it look nicer or stop better.......
Times:
11.18 @ 122 1.61 60'
Still working on the launch...... http://www.slowhawkperformance.com/
How about my car-I think a 364 or 402 under my hood would work well? And hell it's probably one of the fastest C5 Street cars-you know I'll thrash on it!
__________________ HOME OF CANADA'S FASTEST STREET DRIVEN C5's.
FI Specialists, TTix, Procharger, Paxton, Vortech
TTix C5-9.7@157-pump gas
Vortech YSi C5 9.1@155 pump gas
to bad i'm out in Phoenix. I'm deploying in 2 weeks also, but car is going under the knife when i get back with a s91 and a built motor, with th400, and a 9".
TPE is looking to SPONSOR YOU!! 
We think were gonna start playing blackjack after test-n-tune and midnight mayhem events..
. Sounds good about the dates. You guys have some very nice mills, turning machines, CNC equipment.... I would love to have a couple at my buddy's shop/work that have some tool changers. Too damn expensive and work is slow right now though.
My 98 would be perfect.
