#141 11 Second Club
Join Date: Feb 2003
Location: Kansas City, Mo
Posts: 2,746
Quote:
Originally Posted by
MeanGreen Is your car minitubbed?
Nor sir...rear is narrowed 2" on each side.
__________________
2002 Camaro Z28 |HKE 370ci build with 300 shot in progress|old best 10.28@131mph| 2008 LS1tech calender car
2009 Corvette Coupe | M6 | Cyber Grey | Iforged | 11.94@119mph
#142 Staging Lane
Join Date: Nov 2004
Location: East Alabama
Posts: 80
Here's half of my setup since a member on this board sold me the wrong size front wheels.
__________________
#143 On The Tree
Join Date: Feb 2006
Location: Hawesville, KY
Posts: 187
I hate all you guys with Billet Specialties!
__________________
2001 Pewter SS M6 Hardtop, LQ4 bottom end, TRex, TSP oil pump, 853 Heads w/ Patriot Gold Duals, TSP Pushrods, Pacesetter LT's, Aluminum DS, MSD wires, K&N, SLP lid, 3" True Duals w/X pipe & Dynomax Bullets, LS7 Clutch, WS6 Short Stick. http://www.youtube.com/watch?v=deu3AxMWvAc
#144 Teching In
Join Date: Dec 2008
Posts: 10
Just went to Jegs last night and bought a brand new set of Billet Specialties!! Hoping to have them on before to long. I'll have to snap a few pics!
#145 12 Second Club
Join Date: Feb 2006
Location: Orange County, CA
Posts: 1,359
do you have to do any mods to run a 28" tire?? i want to get the 295/45/17 Mickey DRs but dont want to have to do anything but the BFH mod if that to make them fit
__________________
2002 SS #7583 Pewter M6 Hardtop
Forged 347 MS4 cam only
#146 TECH Addict
1996 Pontiac Firebird
Join Date: Nov 2004
Location: Manhattan, KS
Posts: 2,262
The 295/45R17 isn't a 28" tall tire, its more of a 27".
__________________
#147 12 Second Club
Join Date: Jan 2009
Posts: 231
Quote:
Originally Posted by
jhatler2002 Picture of my T/A with some Bogarts:
DAMM BRO UR CAR LOOKS SICK!!!!!!!!
__________________
spec stage 3 clutch torquer2 cam 8.5 msd wires 373 gears
#148 12 Second Club
Join Date: Dec 2004
Location: Cooper City, FL
Posts: 1,303
finally finally got them on...what do joo guise think?
15x3.5's up front w/ 26x7.5 MT sportsman's
15x10.5 in the rear with 325/50/15 nitto 555R's
next tires will be 275 MT ET street radials the 325 nitto's just run so much narrower then MT's I'm running a tiny spacer in the rear as I didn't have enough time to hammer the shit out of the fender wells, nor roll the lips.
car is getting tuned either tom or wed by Jeremy Formato one of if not the best LSX tuners in the country. 42lb injectors being installed as well, getting ready for the giggle gas
Chad
__________________
Engine: heads/cam dart/torquerV2 stock bottom end HS rockers, ls6 intake
Drivetrain: M6(soon to be A3) Moser 9 inch, strange pro case 4.11's
Suspension: UMI LCA's/SFC's/PHB QA1's, midwest Chassis torque arm !front swaybar
#149 11 Second Club
Join Date: Jun 2007
Location: Encinal/Kingsville, Texas
Posts: 533
bump keep it going
__________________99 LS6 Trans Am A4
#150 10 Second Club
Join Date: Jan 2005
Location: Houston
Posts: 277
D10s in the house!
__________________
1999 Trans Am
416 LS3 | APS Extreme Performance kit | 90/90 | Trick Flow 225s | Circle D multi disk | 4L80E | Moser 12 bolt
#151 10 Second Club
Join Date: Jan 2005
Location: Houston
Posts: 277
Quote:
Originally Posted by
jhatler2002 Picture of my T/A with some Bogarts:
Outstanding. Nothing looks better than D10s on the TAs.
__________________
1999 Trans Am
416 LS3 | APS Extreme Performance kit | 90/90 | Trick Flow 225s | Circle D multi disk | 4L80E | Moser 12 bolt
#152 Teching In
Join Date: May 2006
Location: NW Indiana
Posts: 4
Hey smokinlt1 would you be interested in selling one of those rear sets of draglites just the wheels you said you had 2 sets, Thanks Joe
#153 Teching In
Join Date: Jan 2007
Location: El Paso
Posts: 49
keep those drag wheels coming..i know more ppl have drag setups
#154 TECH Resident
Join Date: Dec 2007
Posts: 929
__________________
azss stock! HAVOC
RUN WHAT YA BRUNG!
#155 TECH Addict
1996 Pontiac Firebird
Join Date: Nov 2004
Location: Manhattan, KS
Posts: 2,262
Quote:
Originally Posted by
pozesd99'
Those are greg weld rears, how did you get them to fit?
__________________
#156 TECH Resident
Join Date: Dec 2007
Posts: 929
lt1 brake conversion with grinding the calipers.... fit right on... rear end is narrowed a little bit too
__________________
azss stock! HAVOC
RUN WHAT YA BRUNG!
#157 TECH Resident
Join Date: Dec 2007
Posts: 929
has anyone ever ran these rims?
look good and a great price
__________________
azss stock! HAVOC
RUN WHAT YA BRUNG!
#158 TECH Enthusiast
Join Date: Jan 2003
Location: Chicagoland Area
Posts: 660
Quote:
Originally Posted by
pozesd99' has anyone ever ran these rims?
look good and a great price
Yes I have but don't even try with LS1 brakes. Maybe the fronts but the rears will only fit with drag brakes and just barely.
__________________
94 Firehawk|Speed Inc 383|FLT 4L60E|4000 Circle D stall| Moser 12 bolt 4.10's|11.04 @121.94 N/A|1.52 sixty|3,550 race weight. |477/rwhp 433/tq| The cars a stone. Best sixty 1.46
http://www.fquick.com/badhawk] 2009 LTX Shootout #5 Qualifer Modified Na 11.1 @ 119 mph 148 sixty. Just some junk LT1 trying to hang.
#159 10 Second Club
Join Date: Jun 2004
Location: San Angelo, TX
Posts: 1,678
Quote:
Originally Posted by
pozesd99' has anyone ever ran these rims?
look good and a great price
who makes those?
__________________
2000 NBM A4 Camaro SS #8156 -- 10.85@127.96 MPH 1.66 60' The SS in action! 2001 SOM A4 Camaro SS #487 --- 11.01@129.11 MPH 1.71 60' No Traction
#160 11 Second Club
2000 Chevrolet Camaro
Join Date: Oct 2005
Location: Toledo, Oh
Posts: 3,735
Quote:
Originally Posted by
69_YENKO who makes those?
Centerline.
__________________
LOW-TECH RACING NBM Camaro Z28
Tags 10 , 15x10 , bogart , camaro , chrome , chromemoly , drag , dragstar , lets , ls1 , member , moly , racing , set , setups , star , tech , wheel
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
