Just got my Polished C5 Deep Dish wheels installed last night, and of course its raining today. I couldn't resist to snap a few pictures though, more to come when the rain stops and I can clean it back up.
We have the C6 Z06 Deep Dish in Chrome and Black without rivets.
I was hoping they were available without them in gunmetal. I don't want chrome on my car and was leaning towards gunmetal instead of black. Although, if you can't sell them that way, I may get black without rivets
__________________
KONIs I 36/24mm Sway Bars I Pro-Kit I LCA I Spohn PHB ISFC I LCARB I Wonder Bar
If I wanted a certain color wheel could you do it? I'm guessing when you guys order a black wheel it comes that way and that you don't paint them in house.
That looks better than I thought on NBM! Now I can't decide between gunmetal and chrome for my NBM T/A.
Any issues with ABS or traction control with the staggered sizes?
What size spacers are you running? How much are you lowered?
Sorry for the third degree, but that's almost the exact setup I'm looking at for my car and I want to cover all the bases before ordering.
As long as you run the right size tires there wont be any problems with the abs. Im running a 35 series sidewall on the 18's, and a 40 sidewall on the front 17's. They are both the same height overall, so the staggered wheel size does not affect it. I believe I have 1/4" spacers on. Its about the largest you can run without having to change out to longer lug studs. The wheels actually fit without the spacers, but when I jack the car up they wont clear the bumpstops without the spacers, plus it looks better with the wheels pushed out some anyways
front tires are 295/35/18 and rear are 335/30... so that little bit extra sidewall may be what you r seeing... and if anything, the front sits lower b/c the struts are about gone and need replaced
__________________
'06 Hayabusa- Not stock
'00 Camaro SS- cam/intake/exhaust/stall
it is the 18x10.5 rim running the BFG KWD2 335/30/18... not running any spacers yet, but have some coming. and it drives good, no rubbing anymore, just had to do the normal BFH mods to the inner fender well. didnt even have to roll the fender yet, as i am still at the stock ride height. i think those wheels fill the fender enough that the car doesnt need lowered
__________________
'06 Hayabusa- Not stock
'00 Camaro SS- cam/intake/exhaust/stall
--->
