Got OE Wheels? We need your Images

[OEWheelsLance]

If you are interested in having your vehicle displayed on our website, please submit images in this thread. For consideration I will need the following -

1) Image or link to your vehicle's image
2) SIZE of the wheels on your vehicle
3) The angle of the vehicle has to be similar to the vehicle below
4) They have to be our wheels.

[kane]

19x10 in the rear and 18x8.5 up front

[Black_Z28]

I have high res images if any of these fit your requirements. I also have many others. Not sure if you're looking for only front 1/4 shots or not. So, I threw a few others in there.

18x10.5" on all four corners.

[Count of Monte Crlo]

coming soon

[super_fro_daddy]

Black Z28, what wheels are those? I think those wheels make it look just right - not needing the WS6 hood.

I have a NBM Formula trying to find the right wheel for it. Thinking of going 18" C6 in silver but still undecided. How long did it take to get them from OEWheels?

[93BlackZ28]

Silver ZR1's 17x9.5 & 17x11 Deep Dish

[94TRANS]

17X9.5 and 17X11 Deep Dish Silver ZR1's

[tspence45]

18x10.5" machined face/black vent deep dish C5 Y2k's on all 4 corners. Pics coming of them on my black '98 T/A later this week.

[SexyTransAm]

here r my old ones.
17x9.5 black C5 Z06



and my new ones
17x9.5 in front and 18x10.5 rear

[jaysz2893]

I have posted this b4, but just incase you didnt save it:

17x9.5 & 17x11 Black Deep Dish ZR1's w/ Sumitomo tires (purchased complete wheel/tire combo from OE)

[hyundaiboy]

18x10.5 frt and rears. No mods needed on the front. Tires are 275 35 frt and 295 35 rears.

[Al 96 Ram Air T/A]

I haven't forgotten about you Lance...the car is on hold ...hope to be able to resume working on it soon.

As soon as she's ready for "public viewing" I'll post pics of the wheels on the car.

[speedvette281]

Originally Posted by kane

19x10 in the rear and 18x8.5 up front

Kane,
What size rear tires do you have?
Any BFH mold or spacers to fit the rear 19's?

[Chris Gage]

Originally Posted by hyundaiboy

That deserves front page. Great picture!

[Huff035]

Originally Posted by tspence45

18x10.5" machined face/black vent deep dish C5 Y2k's on all 4 corners. Pics coming of them on my black '98 T/A later this week.

I'm really really liking those. Can't wait to see them on your black T/A.

[tspence45]

Originally Posted by Huff035

I'm really really liking those. Can't wait to see them on your black T/A.

Thanks. And me neither. I just got done taking the back wheels off the Camaro. After I get home from work later, I'll get the fronts off, and hopefully have the wheels put on the T/A by tonight sometime.

[BTC]

Originally Posted by Huff035

I'm really really liking those. Can't wait to see them on your black T/A.

I like those wheels also. I would like to see them in solid black.

[Huff035]

Originally Posted by tspence45

Thanks. And me neither. I just got done taking the back wheels off the Camaro. After I get home from work later, I'll get the fronts off, and hopefully have the wheels put on the T/A by tonight sometime.

Post pics ASAP. I may be interested in getting at set for my black LT1 T/A

[jimbo98z]

Fitting up my new 18x10.5 rear Z06 motorsports now to replace the 17x9.5's. Unfortunately weather isn't so great right now, but I might go snap a few pics in low light, might look cool. Otherwise look for some in the next couple of days.

[OEWheelsLance]

You guys really have a great forum, we sponsor several but this one is the biggest and most fun.

Thanks for posting all the images guys, they look really nice. We are going to start linking images of vehicles with that specific type of wheel on our website (they will start appearing in a few weeks)

I had no idea so many of you were running 10.5s all the way around. We don't even have that set-up on our website because we were worried about the customer having to make mods.