I have called Fikse multiple times a day for 3 days (make that a week now) and left many messages and cant get anyone on the phone or a return call, anyone on here linked to them, know somebody or just plain know a better way to contact them?
Any help is appreciated. TIA
__________________ 2000 SS A4 HARDTOP, Fikse FM5 17x9.5 & 17x11, Eibach prokit, Edelbrock adj panhard, LCA's, LCA relocation brackets, Ported TB, Yank PYE3400, LS6 Intake, Hooker long tubes, Lane's True Duals, Tune, LS6 heads and some valve train stuff to put on, cam coming eventually.
Last edited by 00pooterSS; 10-13-2009 at 07:36 PM..
I wanted to buy an outer lip for one of my rear wheels. A 17x11 FM5
I tried again today still no luck I think I am going to just send it out to a local wheel repair company that has done some awesome work before for the shop I used to manage. I just preferred to actually replace it with a new piece. Oh well if they mess up the hoop then im back where I am now. I am going to specify that they do not touch the center section of the wheel in anyway. In that case I think I will be ok.
__________________ 2000 SS A4 HARDTOP, Fikse FM5 17x9.5 & 17x11, Eibach prokit, Edelbrock adj panhard, LCA's, LCA relocation brackets, Ported TB, Yank PYE3400, LS6 Intake, Hooker long tubes, Lane's True Duals, Tune, LS6 heads and some valve train stuff to put on, cam coming eventually.
Last edited by 00pooterSS; 10-12-2009 at 06:56 PM..
Fikse won't sell you an out loop
they will make you ship the wheel back
to them and it will be real expensive to
replace.
ah damnit... thanks for the info. Guess ill call the wheel repair company, and if they screw it up they can foot the bill for the loop. I just worry about trusting them with my 900$ wheel. But my purpose was to try to save a little but at the same time get the best repair possible. and also I have everything needed to replace it myself no need to pay someone else to do it.
__________________ 2000 SS A4 HARDTOP, Fikse FM5 17x9.5 & 17x11, Eibach prokit, Edelbrock adj panhard, LCA's, LCA relocation brackets, Ported TB, Yank PYE3400, LS6 Intake, Hooker long tubes, Lane's True Duals, Tune, LS6 heads and some valve train stuff to put on, cam coming eventually.
HOLY SHIT!! Wow.... well thanks for the info guys, that really really sucks, I am seriously shocked that Fikse is gone.....
Someone did say in the thread that they were pretty sure forgeline could re-hoop a fikse so that is good but still im at a loss for words that Fikse is done, shit they didnt even change the answering machine messages. Sounds right though some of the times I called it didnt go to a mail box or would cut off like something was goofy with the phones.
__________________ 2000 SS A4 HARDTOP, Fikse FM5 17x9.5 & 17x11, Eibach prokit, Edelbrock adj panhard, LCA's, LCA relocation brackets, Ported TB, Yank PYE3400, LS6 Intake, Hooker long tubes, Lane's True Duals, Tune, LS6 heads and some valve train stuff to put on, cam coming eventually.