LS1TECH - Camaro and Firebird Forum Discussion

Chevrolet Camaro 2010-2015: Window Tint Modifications

Keep reading to learn the answers to the most common questions about tinting the windows on a (2010-2015) Chevrolet Camaro.

By Charlie Gaston - February 24, 2016

This article applies to the Chevrolet Camaro (2010-2015).

There are a lot of arguments for and against modifying the windows on a beautiful pony car such as the (2010-2015) Chevrolet Camaro and how dark (or obscured) you should go in accordance with state laws. While there is no simple answer, it is highly recommended that you consider your own personal reasons for wanting the extra tint on your windows (e.g., increased privacy, extra styling, etc.). Doing so will ensure your needs are met without compromising your budget, safety while driving, or personal tastes.

Window Tint Levels

When it comes to having tint applied to your factory windows, you'll want to leave this job to the pros! If you grow tired of your tinted windows later on down the line, you could remove it yourself using a tint remover product. Many Chevy Camaro owners swear by an inexpensive product currently on the market called Aircraft Paint Stripper. It's easy to apply and costs just $10 at local auto parts retailers such as PepBoys.

Beginner

DIY Cost – $25+

Professional Cost – Professional installation is preferred but not compulsory

Skill Level – Easy; however, some brands are easier to install than others

The good news is when it comes to installing a do-it-yourself window tint, there are some options out there, and most are very cheap. The bad news is many Camaro owners vehemently warn against it. In most cases, the cost and time spent doing the job on one's own simply does not outweigh that of having a pro do it. If you absolutely must apply one of these peel-and-place films on your Camaro, stay away from cheaper versions and always follow the manufacturer's instructions. You may also want to test the smaller side window first so you don't ruin a larger window space.

Instructions are as follows:

  1. Clean windows.
  2. Use a large pre-cut piece of film or cut the large piece of film into smaller pieces that are easier to handle. There may be an option to shrink the pieces as well.
  3. Fit the film to the window completely.
  4. Apply the tinting solution to the film and press down on it to install the film. Smooth out any bubbles.
  5. Tape down edges as recommended by manufacturer.

Intermediate

DIY Cost – Leave this job to the pros!

Professional Cost – $200-$400+

Skill Level – Professional expertise is required

A good starter tint will fall somewhere between 20% and 35% with adjustments made as needed. For instance, you may want to add a 35% window tint to your side windows and a 20% window tint to both your front windows and rear windows. This popular tint combination would allow for reduced sunlight while driving, without going outside the legal parameters of window tint laws in your state, or obstructing your ability to safely operate your vehicle at nighttime. Once again, depending on state law, you could add a limo tint (5% tint) to your rear windows for increased privacy from motorists traveling behind your vehicle. However, this would only allow 5 percent of light into your Camaro from the rear window.

Advanced

DIY Cost – N/A

Professional Cost – $200-$400+

Skill Level – Professional expertise is required

When having your windows tinted professionally, you'll need to compare quotes. Generally speaking, however, the cost should run you around $300 for your entire car. Most professional window tints come with a lifetime warranty, so inquire about that as well. Ceramic tints might run you $100 or more depending on where you live. Having a ceramic tint is advisable if you don't want any interference with your factory radio. Otherwise, you might need to purchase an aftermarket antenna to combat interference. No matter what type of window tint you choose, always be sure to check that having a window tint is legal in your state.

Related Discussions