This C2 Is What a 625HP Corvette Looks Like

Custom Vette

How often do you encounter '63 Chevrolet Corvettes that like this? It rides on a custom chassis and the custom work doesn't stop there, it has 27 points of carbon fiber on its interior and exterior.

Photos courtesy of Mecum. 

Powertrain

Under the hood sits an LS3 376 ci V8 powerplant which pumps out 625 horsepower. All of these ponies run through a Tremec T56 Magnum 6-speed manual transmission with and an LS9 clutch. 

Photos courtesy of Mecum.

>>Join the conversation about this LS3 C2 right here in the LS1 Tech Forum!

Interior

This Corvette looks as good on the inside as it does on the outside. Open the door and you'll be welcomed by custom Black interior from HRH Designs of Las Vegas, Douglass leather, and mood lighting.  

Photos courtesy of Mecum.

>>Join the conversation about this LS3 C2 right here in the LS1 Tech Forum!

Exterior

The PPG Jet Black paint job with premiere clear coat really sets this Corvette apart. This model looks fantastic from any angle, but it's custom jet-coated, polished stainless steel exhaust system makes driving behind it a pleasure: we imagine it sounds as good as it looks.

Photos courtesy of Mecum.

>>Join the conversation about this LS3 C2 right here in the LS1 Tech Forum!

Wheels

This split window coupe rides on Budnik forged wheels with knock-off center caps. Wrapping these beautiful rims are Nitto Invo Red stripe tires. 

Photos courtesy of Mecum.

>>Join the conversation about this LS3 C2 right here in the LS1 Tech Forum!

Brakes

Bringing everything to a brisk halt are Wilwood 14-inch cross-drilled and slotted brake rotors. There are 6-piston calipers at the front and 4-piston calipers at the rear, all running through a Wilwood master cylinder. The car has also been fitted with an E-Stopp electric emergency brake. 

Photos courtesy of Mecum.

>>Join the conversation about this LS3 C2 right here in the LS1 Tech Forum!

Performance Parts

To say this Vette is dripping in performance parts is an understatement. Helping the engine on its way to its 625 horsepower output is a forged rotating assembly, Holley Sniper intake, and Billet Specialties valve covers. Keeping everything in check through the bends is a RideTech fully adjustable coilover suspension system and a Tru-Turn system. 

Photos courtesy of Mecum.

>>Join the conversation about this LS3 C2 right here in the LS1 Tech Forum!

For help with service of your car, check out the how to section of LS1Tech.com