Looking for shop to weld SFC - Florida, Brevard County
Thread Starter
Registered User
Joined: Oct 2008
Posts: 30
Likes: 0
Looking for shop to weld SFC - Florida, Brevard County Looking for shop to weld in SFC's, preferably in Brevard county (FL). Found one so far, very high end shop, and I am not looking to pay for "half day" of labor. Did I grossly underestimate the cost of this mod.... I was thinking $100-$150 tops. UMI box style, underbody is in good shape,....
Chewie
Chewie
Half a day is way too much...
...it can be done in less than an hour...make sure that the car is on a rack that you drive up on..you must have the car sitting on its tires so that the chassis is loaded with the full weight of the car...shop around and you will find someone who can do it without ripping you off for a half a day..good luck....it should cost $75-$100
...it can be done in less than an hour...make sure that the car is on a rack that you drive up on..you must have the car sitting on its tires so that the chassis is loaded with the full weight of the car...shop around and you will find someone who can do it without ripping you off for a half a day..good luck....it should cost $75-$100 Last edited by slt200mph; Oct 18, 2008 at 04:07 PM.
Thread Starter
Registered User
Joined: Oct 2008
Posts: 30
Likes: 0
Thanks for the good vibe. I have checked with a sponsor from the list, and was quoted a nice deal, just about a half a tank of gas away. I am pretty impulsive, and if it comes down to it, will just make the drive.
Wish I hadn't slept so late (I work graveyard shifts).... Camarofest, is a short drive away, next to or at Ecklers Corvettes in Titusville. Could have driven down there and asked someone I bet
SFC, DA 4140 PHB, LCA, visible in living room, not on car yet, so, so sad....
Chewie
Wish I hadn't slept so late (I work graveyard shifts).... Camarofest, is a short drive away, next to or at Ecklers Corvettes in Titusville. Could have driven down there and asked someone I bet
SFC, DA 4140 PHB, LCA, visible in living room, not on car yet, so, so sad....
Chewie
Thread Starter
Registered User
Joined: Oct 2008
Posts: 30
Likes: 0
Meineke worked out good. Bringing the SFC's by the cocoa shop tomorrow AM after work. Thanks for the tip, I had found one of the sponsors willing to do it good price as well, but this trumps a long drive.
Can't wait to get this done, lessons learned from owning an 81 Firebird, and a 69 Camaro in the past...... (IMHO), do the suspension first. After this and the LCA's + APHB go on, time to save for Torque Arm, then a vig 3600 and full tune.
Can't wait to get this done, lessons learned from owning an 81 Firebird, and a 69 Camaro in the past...... (IMHO), do the suspension first. After this and the LCA's + APHB go on, time to save for Torque Arm, then a vig 3600 and full tune.
Trending Topics
what is "camarofest" I recently moved to barefoot bay in south brevard (just north of the indian river and brevard county line) from jersey. I don't **** down here yet.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
