1200rwhp boy will it be fun! 
dream build.....
dream build..... now that the twin screw is coming who has started a dream build.
just trying to pick people's brains..... i was in the process of buying stuff for a stroker motor. but i think that through recent events my mind has changed.
so if you where going to build one sick *** motor what would it be......6.0,6.2,lsx bored to whatever etc......
just trying to pick people's brains..... i was in the process of buying stuff for a stroker motor. but i think that through recent events my mind has changed.
so if you where going to build one sick *** motor what would it be......6.0,6.2,lsx bored to whatever etc......
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Between Trakday myself and some others the KB will have a million bugs to work out before they will even stand a chance!
I know everyone is excited about this Twin Screw coming out and I am glad we will have another option for Forced Induction. If according to your post you will be pushing 1000rwtq and my car is pushing 1200rwtq it really comes down to who has the better suspension, rearend, and Drag setup. Since my car is a street car and will never be tracked it would be safe to say you would beat me at the track as I only drag once in a blue moon. Not everyone cares about 1/4 mile times.
Last edited by ArklaTexan; Oct 18, 2008 at 11:02 AM.
Built KB, I am a twin turbo GTO with Spray (not used until forged). my point was to Cabro that when I forge my shortblock I will be pushing 1200rwhp. If you honestly think a KB GTO will keep up we may need to put some money on it.
Between Trakday myself and some others the KB will have a million bugs to work out before they will even stand a chance!
I know everyone is excited about this Twin Screw coming out and I am glad we will have another option for Forced Induction. If according to your post you will be pushing 1000rwtq and my car is pushing 1200rwtq it really comes down to who has the better suspension, rearend, and Drag setup. Since my car is a street car and will never be tracked it would be safe to say you would beat me at the track as I only drag once in a blue moon. Not everyone cares about 1/4 mile times.
Between Trakday myself and some others the KB will have a million bugs to work out before they will even stand a chance!
I know everyone is excited about this Twin Screw coming out and I am glad we will have another option for Forced Induction. If according to your post you will be pushing 1000rwtq and my car is pushing 1200rwtq it really comes down to who has the better suspension, rearend, and Drag setup. Since my car is a street car and will never be tracked it would be safe to say you would beat me at the track as I only drag once in a blue moon. Not everyone cares about 1/4 mile times.
i still haven't heard any dream setup's.......
i am a lil new to this...seeing how i crossed over from mini-trucks to one of the most hated gm cars there is.
i was thinking of a 383 or 402 with a healthy shot of nitrous. building for the termie's that i have encountered and not quite measured up. now with this out we can end the arument of if lsx had a KB etc.......
Here is my dream build which I already have...
Built iron 408
TH400 tranny
ETP Heads
Twin GT2R turbos (74mm)
Custom Moser 9" SRA conversion
10pt roll cage
Lots of stupid high end parts
Who cares how much power it makes... it goes 9.60 on the rev limiter. It WILL go 8.50s when I turn the boost up!!!
Hows that!?
Built iron 408
TH400 tranny
ETP Heads
Twin GT2R turbos (74mm)
Custom Moser 9" SRA conversion
10pt roll cage
Lots of stupid high end parts
Who cares how much power it makes... it goes 9.60 on the rev limiter. It WILL go 8.50s when I turn the boost up!!!
Hows that!?
LQ9 Iron Block Forged, top quality stuff.
Best Built transmission I can find.
2.6L or 2.8HH Kenne Bell OR SNL front mount single turbo w/ supporting
fuel systems.
Either an 8.8 or the 9 point rear end that is being worked on atm
Mini tubbed to fit some big boys out back.
SCSS Gator Pod gauges all around.
Formato Tune.
That will be my dream setup, my mean street machine.
Best Built transmission I can find.
2.6L or 2.8HH Kenne Bell OR SNL front mount single turbo w/ supporting
fuel systems.
Either an 8.8 or the 9 point rear end that is being worked on atm
Mini tubbed to fit some big boys out back.
SCSS Gator Pod gauges all around.
Formato Tune.
That will be my dream setup, my mean street machine.
Staging Lane
Joined: Oct 2008
Posts: 59
Likes: 0
My dream build would be a forged 402 LS2.
The KB 2.8 or maybe a Procharger (KB is the first choice!)
An 8.8 rear end conversion with DS and axles.
A kick *** fuel system.
Some more SCSS gauges.
Build my M6 when it goes out.
Maybe put a little nitrous shot back on it to show Daniel whats up with the KBs
Lol JK man :gears:
The KB 2.8 or maybe a Procharger (KB is the first choice!)
An 8.8 rear end conversion with DS and axles.
A kick *** fuel system.
Some more SCSS gauges.
Build my M6 when it goes out.
Maybe put a little nitrous shot back on it to show Daniel whats up with the KBs
Lol JK man :gears: