Shaved Door Handles: Yay or Nay. Lets see some pics.
Thread Starter
TECH Regular
Joined: Feb 2008
Posts: 458
Likes: 1
From: Keller, Texas
Shaved Door Handles: Yay or Nay. Lets see some pics. I am considering shaving off my door handles but i have never seen 93+ fbodys with this modification.
Shaving the door handles would make a fbody look very sleek and clean IMO.
POST UP SOME PICS.
Shaving the door handles would make a fbody look very sleek and clean IMO.
POST UP SOME PICS.
I think most tracks have a rule that they won't let you touch the track unless you have handles, so if you've got dreams of time slips, I wouldn't do it, but if your ride will never see a closed curcuit, go for it! I want to see how it looks! I want to shave my fuel door and antenna. I already shaved the front license plate cover! I like my cars like I like my women...SHAVED!!! 
Swat
Swat
TECH Apprentice
Joined: Jun 2007
Posts: 362
Likes: 2
I think most tracks have a rule that they won't let you touch the track unless you have handles, so if you've got dreams of time slips, I wouldn't do it, but if your ride will never see a closed curcuit, go for it! I want to see how it looks! I want to shave my fuel door and antenna. I already shaved the front license plate cover! I like my cars like I like my women...SHAVED!!!
Swat
Swat
I'm not sure how it would look.
Thread Starter
TECH Regular
Joined: Feb 2008
Posts: 458
Likes: 1
From: Keller, Texas
How hard was to shave the door handles?
Thread Starter
TECH Regular
Joined: Feb 2008
Posts: 458
Likes: 1
From: Keller, Texas
I think most tracks have a rule that they won't let you touch the track unless you have handles, so if you've got dreams of time slips, I wouldn't do it, but if your ride will never see a closed curcuit, go for it! I want to see how it looks! I want to shave my fuel door and antenna. I already shaved the front license plate cover! I like my cars like I like my women...SHAVED!!!
Swat
Swat
But i am getting tired of e/ts and the track car image. So, the 94z will be the clean street car and my lsx car will be track car.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
I guess you could fill it up before you shave the filler door! 
Thread Starter
TECH Regular
Joined: Feb 2008
Posts: 458
Likes: 1
From: Keller, Texas
i shaved my key holes on both sides cause someone fucked up my car with a screw driver while i was at work. and i also didnt want to pay big bucks for new doors or to get the hole fixed.
still primered in these pics.
still primered in these pics.
![6']['9's Avatar](https://ls1tech.com/forums/customavatars/avatar7527_3.gif){kind=avatar}
well the key holes were already punched out, so i put a piece of tape inside the door panel on the backside of the hole and used bondo to fill it in, sand it down until it was flat. then i would relay bondo down to fix imperfections and sand again. i did this process 4-5 times until it was good enough for my liking.
