Magna Charger TVS1900 Install PICS
Thread Starter
blownerator
iTrader: (20)
Joined: Mar 1986
Posts: 18,698
Likes: 0
From: Chatsworth, CA
Magna Charger TVS1900 Install PICS I am starting this thread to feature the install of the MP1900 Supercharger System on my 2008 G8 GT. I will be posting up before and after Dyno Runs, Before and during install pictures with technical data as we go along. The install will Start on Wednesday and the dyno baseline is tomorrow.
I think the blower will be a nice addition to the plates
I think the blower will be a nice addition to the plates
Thread Starter
blownerator
iTrader: (20)
Joined: Mar 1986
Posts: 18,698
Likes: 0
From: Chatsworth, CA
OK here we go, please excuse the photos....I am still learning the new camera. This is a slightly abridged step by step process, detailed instructions can be found @ www.magnacharger.com. And remember to contact your favorite board sponsor on the left for your Magna Charger purchase.
Drain your coolant:
Remove the stock air intake
Unclip your injectors:
Unplug your Brake booster check valve:
Unbolt your Throttle Body:
Unplug the EVAP Solenoid:
Unplug the fuel feed ling using the supplied tool. BE SURE TO DO THIS WHEN THE VEHICLE IS COOL:
Drain your coolant:
Remove the stock air intake
Unclip your injectors:
Unplug your Brake booster check valve:
Unbolt your Throttle Body:
Unplug the EVAP Solenoid:
Unplug the fuel feed ling using the supplied tool. BE SURE TO DO THIS WHEN THE VEHICLE IS COOL:
Thread Starter
blownerator
iTrader: (20)
Joined: Mar 1986
Posts: 18,698
Likes: 0
From: Chatsworth, CA
I suggest capping off the fuel line on the rails before removal:
Unbolt the intake manifold:
Remove Intake Manifold:
Tape off intake ports on the heads:
Remove the stock belt and tensioner:
Unbolt the intake manifold:
Remove Intake Manifold:
Tape off intake ports on the heads:
Remove the stock belt and tensioner:
Thread Starter
blownerator
iTrader: (20)
Joined: Mar 1986
Posts: 18,698
Likes: 0
From: Chatsworth, CA
Unplug MAF
Remove airbox:
Remove front bumper cover:
Remove Fans:
Remove radiator mounts:
Tilt back Radiator assembly and install Heat Exchanger (I painted my black):
Remove airbox:
Remove front bumper cover:
Remove Fans:
Remove radiator mounts:
Tilt back Radiator assembly and install Heat Exchanger (I painted my black):
Thread Starter
blownerator
iTrader: (20)
Joined: Mar 1986
Posts: 18,698
Likes: 0
From: Chatsworth, CA
Pinning the crank pulley( we provide an awesome tool to do this with):
Remove the stock crank bolt:
Install supplied tool/guide:
Using supplied steeped drill bit drill the holes:
Trending Topics
Thread Starter
blownerator
iTrader: (20)
Joined: Mar 1986
Posts: 18,698
Likes: 0
From: Chatsworth, CA
Remove the stock steam crossover:
Install supplied steam crossover:
Install new tensioner:
Remove protective tape and spray silicone spray on the heads:
Time for the fun part, get your supercharger!:
With an assisant install the supercharger on the heads:
Install supplied steam crossover:
Install new tensioner:
Remove protective tape and spray silicone spray on the heads:
Time for the fun part, get your supercharger!:
With an assisant install the supercharger on the heads:
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
blownerator
iTrader: (20)
Joined: Mar 1986
Posts: 18,698
Likes: 0
From: Chatsworth, CA
Torque the manifold to 18 inch pounds:
Reinstall your coils:
Install supplied heater hoses:
Install Throttle Body:
Install vacuum lines:
Install supplied belt:
Reinstall your coils:
Install supplied heater hoses:
Install Throttle Body:
Install vacuum lines:
Install supplied belt:
Thread Starter
blownerator
iTrader: (20)
Joined: Mar 1986
Posts: 18,698
Likes: 0
From: Chatsworth, CA
I am jealous of your sig pic
Thanks! Yea, track is next I am shooting for low 12's on street tires and high 11's on sticky tires.
Thread Starter
blownerator
iTrader: (20)
Joined: Mar 1986
Posts: 18,698
Likes: 0
From: Chatsworth, CA
