Starting turbo G-body research...
I am no stranger to turbos (grand national guy at heart), but I am considering swapping a turbo 6 liter into a g-body and am starting to do my reading. The initial plan is to use an LQ4/4L80E (or possibly a T56) and a single turbo with either a log type PS manifold and conventional crossover or a crossover in the front.
What supporting mods need to be done to the LQ4 for a mild turbo setup?
My goal is to have a fun, different cruiser that can rip off 11.0's at the track if necessary. Suspension mods will be full HR rear package with C5 brake conversion all around and SC&C AFX Stage 3 kit up front. I'm excited about the prospect of the LS motor because of the aftermarket support and because of communities like this one.
I look forward to reading and learning in the next few months!
Thanks,
MD
http://s214.photobucket.com/albums/cc192/Grrh77/
http://www.youtube.com/watch?v=Jq531vXOm9Q
Link to his build though i believe you must be a member to view.
http://www.turbobuick.com/forums/tur...urbo-swap.html
Hes on here but dont know his screen name off hand
Edit: found this link and his name is Grr and he posted alot of info
https://ls1tech.com/forums/forced-in...ml#post8069816
Last edited by Verz; Nov 15, 2008 at 09:47 PM.







