wtf is that knocking noise........

Reply Subscribe

Thread Tools

Search this Thread

Nov 19, 2008 | 10:30 AM

negrodamus

Thread Starter

Registered User

Joined: Nov 2008

Posts: 5

Likes: 0

wtf is that knocking noise........

I've been noticing this really loud knocking noise in my 99 z/28. I've only noticed it when braking. So I took it to a shop they put it up on the lift checked all the brakes and they were all fine. they didn't know what else it could be. Any one else have this problem before? How did you fix it? could it possibly be the brake booster? It sounds like its just right there in front of me when it happens. any ideas?

Thanks

Nov 19, 2008 | 11:20 AM

BMR Tech2

LS1Tech Premium Sponsor

iTrader: (5)

Joined: Apr 2008

Posts: 4,173

Likes: 20

From: Tampa FL

It could be a number of things but i would start by checking your upper and lower a arm bushings and maybe ball joints.

__________________
T.C.
Sales Pro
BMR Suspension
(813) 986-9302

Like us on Facebook!

Nov 19, 2008 | 12:41 PM

robsquikz28

TECH Veteran

iTrader: (246)

Joined: Mar 2008

Posts: 4,984

Likes: 1

From: Chicago/Crown point

ive even seen the front struts do it so check there as well....

Nov 19, 2008 | 06:30 PM

MeangreenHD

TECH Apprentice

iTrader: (6)

Joined: Oct 2007

Posts: 373

Likes: 0

From: Pittsburgh

do you happen to have a ds loop? my driveshaft was makin contact with the loop support when i would brake.

Nov 19, 2008 | 08:02 PM

kierstyn

TECH Enthusiast

iTrader: (5)

Joined: Sep 2007

Posts: 679

Likes: 1

From: TN

Check your front sway bar bushings I had a friend that had them go bad and it started poopn and maken all kinds of sounds.

Nov 19, 2008 | 08:34 PM

negrodamus

Thread Starter

Registered User

Joined: Nov 2008

Posts: 5

Likes: 0

cool. thanks guys. I'll check all the things listed. any other ideas? and no i dont have a drive shaft loop. the car is completely stock and was a one owner, 84,000 mile car. I ordered an air lid for it and I'll put exhaust on it and do some free mods but other than that it will remain stock until I get it paid off!

Nov 20, 2008 | 10:11 PM

nightrider388

Teching In

Joined: Jul 2007

Posts: 6

Likes: 0

noise

Mine had a knock too. Mine was the brake rattle clips and rotors...i replaced all my rotors and brakes, and found caliper pin seized up... all better now, quiet as a mouse...