c5 seat in an fbody
Thread Starter
On The Tree
Joined: Apr 2007
Posts: 132
Likes: 0
From: germantown, maryland
c5 seat in an fbody i have a driver seat out of a c5 and i was thinking about putting in as it has more bolstering the stock camaro seats which as anyone one whos been in a stock seat fbody knows its like a slip and slide leather edition, but anyway since i have the seat im thinking about putting it intill i can afford my recaros but i was just wondering if anyone knows if it will just bolt up or do i need to make some brackets etc..... any input who be greatly appericated
My bet would be someone in the appearance section has tried it. GM generally does parts like seats as parts bin bolt in, so just check the bolt spacing on the bottom of the C5 seat compared to your f-body seat and you will be able to tell.
-Tim
-Tim
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
I had my TA seat recovered and padded and MAN are they perfect. They have a lot of support and are now way more comfortable than the vette seats. Also I dont think the vette seats offer much stability because they are normally pressed back against the rear deck.
Thread Starter
On The Tree
Joined: Apr 2007
Posts: 132
Likes: 0
From: germantown, maryland
s2000 seats are nice but pricey for a stock seat at least around here for that money i might as well wait and get recaros or something like that plus im not so sure about that just bolting right in and they arent that light but neither are stock c5 seats either
gottem in my car, and love'em. better than ta seats. you'll have to drill back holes. i moved the left front bracket on the seat inboard so i could use the stock stud on the floor, but you should be able to drill a hole instead. start by setting the seat on the right stock floor stud for positioning. these seats also have more front to rear travel which is good if you're over 6 ft.
