My S80 truck manifold kit

Reply Subscribe

Thread Tools

Search this Thread

Dec 19, 2008 | 04:41 PM

B18CYA

Thread Starter

Launching!

iTrader: (17)

Joined: May 2006

Posts: 278

Likes: 0

From: MN

My S80 truck manifold kit

Been lurking around here for two years now collecting parts for my build. Probably time to get to work!!

ENGINE
lq4 bore .005
eagle 4" crank
eagle rods l19 bolts
wiesco pistons
total seal rings with stainless top ring
arp head and main studs
patriot stage III 317
va speed cam
texas speed ported ls6 oil pump
double roller timing chain
ls6 intake

ENGINE MANAGEMENT
bs3

TURBO KIT
S80 purchased from forced induction 2/07 very dusty
all stainless hot side piping including flanges
turbo smart 48mm progate
ebay intercooler
4" dp

some pics

Last edited by B18CYA; Apr 15, 2011 at 06:17 PM.

Dec 19, 2008 | 05:02 PM

Josh@KY-Turbo

Banned

iTrader: (120)

Joined: Feb 2002

Posts: 3,199

Likes: 1

Nice looking layout.

Dec 19, 2008 | 05:11 PM

B18CYA

Thread Starter

Launching!

iTrader: (17)

Joined: May 2006

Posts: 278

Likes: 0

From: MN

Quote:

Originally Posted by Josh @ KYTP

Nice looking layout.

thanks wanted to leave plenty of room to work on the car and keep it easy to tear the kit down if need be

more pics

Dec 19, 2008 | 05:30 PM

Josh@KY-Turbo

Banned

iTrader: (120)

Joined: Feb 2002

Posts: 3,199

Likes: 1

What front k-member setup are you running to squeeze the 4" DP trough?

Dec 19, 2008 | 06:38 PM

frcefed98

TECH Senior Member

iTrader: (16)

Joined: Oct 2002

Posts: 6,907

Likes: 6

From: Albuquerque, NM

Nice placement of the turbo, similar to Kyle's (NA$TY-TA) seems like there is a ton of room too.

Dec 19, 2008 | 07:39 PM

RealQuick

TECH Junkie

iTrader: (14)

Joined: Feb 2004

Posts: 3,970

Likes: 15

From: MA

Nice!

Dec 19, 2008 | 07:48 PM

B18CYA

Thread Starter

Launching!

iTrader: (17)

Joined: May 2006

Posts: 278

Likes: 0

From: MN

Quote:

Originally Posted by Josh @ KYTP

What front k-member setup are you running to squeeze the 4" DP trough?

bmr turbo k member. but its not ideal if you plan on running the dp next block... like me. heres a pic of a piece of 4" through it judge for your self

Last edited by B18CYA; Dec 19, 2008 at 08:00 PM.

6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'

Brett Foote

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Pouria Savadkouei

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Verdad Gallardo

7 Most Reliable High-Performance Engines GM Has Ever Built

Verdad Gallardo

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Dec 19, 2008 | 08:57 PM

DrTurbo

LS1TECH Sponsor

iTrader: (3)

Joined: Mar 2006

Posts: 3,966

Likes: 2

Very nice. Should be a STOUT car.....let us know if you need anything else!!

Dec 19, 2008 | 09:04 PM

#10

eviltwin_1987

TECH Fanatic

iTrader: (18)

Joined: Sep 2006

Posts: 1,002

Likes: 0

From: Nor Cal

what radiator fans are those?

Dec 20, 2008 | 02:44 PM

#11

B18CYA

Thread Starter

Launching!

iTrader: (17)

Joined: May 2006

Posts: 278

Likes: 0

From: MN

Quote:

Originally Posted by DrTurbo

Very nice. Should be a STOUT car.....let us know if you need anything else!!

thanks might be calling about upgrading to a 88 and a race cover. this was originally for a 347 then went iron then to a 4" crank...

Dec 20, 2008 | 04:03 PM

#12

B18CYA

Thread Starter

Launching!

iTrader: (17)

Joined: May 2006

Posts: 278

Likes: 0

From: MN

Quote:

Originally Posted by eviltwin_1987

what radiator fans are those?

summit part FLX-210 2500 cfm puller

Dec 20, 2008 | 05:39 PM

#13

venom ws7

11 Second Club

iTrader: (13)

Joined: Jul 2003

Posts: 5,965

Likes: 1

From: EARTH

Nice build man good luck with the rest of it should be a mean SOB.

Dec 22, 2008 | 11:19 AM

#14

DrTurbo

LS1TECH Sponsor

iTrader: (3)

Joined: Mar 2006

Posts: 3,966

Likes: 2

Quote:

Originally Posted by B18CYA

thanks might be calling about upgrading to a 88 and a race cover. this was originally for a 347 then went iron then to a 4" crank...

....

Dec 22, 2008 | 12:03 PM

#15

BlazinT/A

TECH Regular

iTrader: (10)

Joined: Jan 2006

Posts: 449

Likes: 0

From: Brooklyn CT

Quote:

Originally Posted by B18CYA

bmr turbo k member. but its not ideal if you plan on running the dp next block... like me. heres a pic of a piece of 4" through it judge for your self

why are you running the dp next to the block instead of in the pocket of the kmember?