E36 BMW M3 LS1/ M6 has begun
Hydroboost Modified hydroboost. I cut the stock eyelet off the BMW booster and welded it to the hydroboost. Its a bit ugly... but it actually works really well. For those that are wondering of the hydroboost conversion is worth it- YES! The car stops so well its amazing!
E46 M3 drivers seat installed E46 M3 drivers seat installed. It sits significantly lower than the E36 seat did... good info for you really tall guys. Mine are power, so I can adjust the Height, back, bolsters, etc. Well worth the upgrade!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
1st Kill Ok gents, I know there is a specific section for "KILLS" but I have to brag a little!
On the way home from work there was an Mercedes E55 AMG racing a Mitsubish EVO. The EVO lost, I decided to get stupid. We went from about 65 mph. I stayed on him up to about 90 in 5th and decided 4th was more appropriate. I caught him at 100, passed him at 110, and put about 6-8 cars between us at 140. I was laughing my *** off wondering what was going through his head!
On the way home from work there was an Mercedes E55 AMG racing a Mitsubish EVO. The EVO lost, I decided to get stupid. We went from about 65 mph. I stayed on him up to about 90 in 5th and decided 4th was more appropriate. I caught him at 100, passed him at 110, and put about 6-8 cars between us at 140. I was laughing my *** off wondering what was going through his head!
Last edited by unnatrl; Jan 26, 2009 at 09:17 PM.
Registered User
Joined: Jan 2009
Posts: 1
Likes: 0
unnatrl,
I work over at Acura of Reno. One day I was outside and I heard a V8 coming down S. Virgina. I was thinking it was a Z06 or something and it was one of the strangest things I've seen, your car. I googled it and found this site. You have to bring your car by sometime so I can take a peek. I have an E36 Euro Spec M3 I imported years ago which I stripped and making way for an LS7. Would love to see your car.
Regards,
Chris
I work over at Acura of Reno. One day I was outside and I heard a V8 coming down S. Virgina. I was thinking it was a Z06 or something and it was one of the strangest things I've seen, your car. I googled it and found this site. You have to bring your car by sometime so I can take a peek. I have an E36 Euro Spec M3 I imported years ago which I stripped and making way for an LS7. Would love to see your car.
Regards,
Chris
I will definitely bring it by. My buddy works across the street at Bill Pearce and keeps bugging me to bring it in & complain the exhaust seems too loud... I'm guessing it may get a few weird looks 
Teching In
Joined: Mar 2008
Posts: 7
Likes: 0
From: Spokane, WA
Hey, could you post up some pictures of how your steering shaft turned out? I have a good idea of how I'm going to do mine, but it's always good to see other people did it. Also, maybe I missed it, but I didn't see any part numbers for the headers you are using. I was looking at the Sanderson's and wanted to compare them with yours. Thanks
I used the hooker block hugger headers. There are only 2 part #'s, one for coated and one for non coated. I dont have the part # off the top of my head...
I will get some pics of the steering shaft.
I will get some pics of the steering shaft.
