67 mustang hybrid starts

Reply Subscribe

Thread Tools

Search this Thread

Jun 17, 2009 | 04:39 PM

#21

kirtondog23

Launching!

Joined: Apr 2007

Posts: 276

Likes: 0

From: Utah

You could try that, but you may run the risk of air mixing and fouling up the read, depending on how short the pipes are. Then again might as well get the exhaust on there as you will need it any way.

Keep us posted!

I get this too. you have a what? With a what in it?

Jul 2, 2009 | 05:48 PM

#22

jason dearduff

Thread Starter

Teching In

Joined: Nov 2008

Posts: 42

Likes: 0

ok guys i got the car back from the exahust shop. i have one small problem. i have to run a jumper wire from the batt to the pink pcm ignition wire for it to run correct. i seams that nothing under the dash holds a true 12 volts while cranking and running. i am thinking i can run the feed off the starter? does that sound like it would work, i assume i will have to install a toggle switch or something? buy the way this thing is crazy loud, it sound great.

Jul 7, 2009 | 05:19 PM

#23

jason dearduff

Thread Starter

Teching In

Joined: Nov 2008

Posts: 42

Likes: 0

how about a starter relay, anyone know how that is wired? i can't stand the toggle switch idea on a street car with many drivers? any help would be appreciated!

Jul 7, 2009 | 07:57 PM

#24

LS1MCSS

TECH Junkie

iTrader: (18)

Joined: Jan 2006

Posts: 3,831

Likes: 8

From: Dover, Arkansas

There has to be a wire somewhere that used to send power to the old ignition coil. That should be hot in run and start, both.

Jul 7, 2009 | 08:45 PM

#25

jason dearduff

Thread Starter

Teching In

Joined: Nov 2008

Posts: 42

Likes: 0

yes there is that wire but it send only 6 volts because of a resister wire is used for what ever reason?

Jul 8, 2009 | 11:18 AM

#26

SatisTraction

TECH Regular

iTrader: (2)

Joined: Dec 2004

Posts: 459

Likes: 0

From: jackson ms

remove the resistor, you dont need it.

Jul 9, 2009 | 08:35 AM

#27

jason dearduff

Thread Starter

Teching In

Joined: Nov 2008

Posts: 42

Likes: 0

so what you are saying is remove the resister wire from the back of the ignition switch and replace the total length?

Jul 9, 2009 | 11:24 AM

#28

holley505

TECH Enthusiast

iTrader: (1)

Joined: May 2005

Posts: 572

Likes: 0

From: central florida

sweet!!

LS1 Tech Stories

The Best V8 Stories One Small Block at Time

6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'

Brett Foote

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Pouria Savadkouei

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Verdad Gallardo

7 Most Reliable High-Performance Engines GM Has Ever Built

Verdad Gallardo

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Jul 11, 2009 | 03:31 PM

#29

jason dearduff

Thread Starter

Teching In

Joined: Nov 2008

Posts: 42

Likes: 0

thanks, i have some more pics of the progress if someone would post them for me?

Jul 14, 2009 | 08:58 AM

#30

jason dearduff

Thread Starter

Teching In

Joined: Nov 2008

Posts: 42

Likes: 0

thanks to lugnut42 there will be some updated pics.

Jul 14, 2009 | 06:17 PM

#31

LS1MCSS

TECH Junkie

iTrader: (18)

Joined: Jan 2006

Posts: 3,831

Likes: 8

From: Dover, Arkansas

Here they are. It's going to be a nice ride.

Attached Thumbnails

Sep 8, 2009 | 02:46 PM

#32

ace_xp2

Teching In

Joined: Sep 2009

Posts: 23

Likes: 0

Any progress on this? I'm dying to know how you did it as I'm getting pretty close to game time for my own swap.
It would be damn nice to have yours as a guideline. (Plus it sounds like you've got a simple way to do it.)