That's where my SS resides. 
WELCOME! Sound off Say Hello
New FRC owner checking in from oregon Im John, Im 22. Been on this site for about 8 -10 months. Just picked mine up this weekend and figured Id join.
Drove 6.5 hours sunday to pick up my dream car.
Some bad camera phone pictures
2000 FRC black on black. Loaded with HUD
Came with some goodies too
Blackwing Intake
Borla Catback
4 new eagle f1 tires
new rotors and pads all around
new clutch
short throw
stereo system
Got it from the original owner. Carfax shows oil changes every 3,000-4,000 miles at the dealer as well as 2 FULL pages of maintenance. oil, fuel pump, fuel filter, alignment, a/c, brake, trans, and rear diff fluid, etc.
Next on the list is
Kooks long tube headers
Fast 90/90
Winter project
Eagle rod bolts
MS4 Cam
AFR 225cc heads
Car is amazing to drive. Got 32.8 mph coming home with the cruise at 75. it was turning about 1700 rpms in 6th. The torque is amazing.
Drove 6.5 hours sunday to pick up my dream car.
Some bad camera phone pictures
2000 FRC black on black. Loaded with HUD
Came with some goodies too
Blackwing Intake
Borla Catback
4 new eagle f1 tires
new rotors and pads all around
new clutch
short throw
stereo system
Got it from the original owner. Carfax shows oil changes every 3,000-4,000 miles at the dealer as well as 2 FULL pages of maintenance. oil, fuel pump, fuel filter, alignment, a/c, brake, trans, and rear diff fluid, etc.
Next on the list is
Kooks long tube headers
Fast 90/90
Winter project
Eagle rod bolts
MS4 Cam
AFR 225cc heads
Car is amazing to drive. Got 32.8 mph coming home with the cruise at 75. it was turning about 1700 rpms in 6th. The torque is amazing.
Teching In
Joined: Apr 2007
Posts: 42
Likes: 0
From: Mt. Vernon,WA
North Members? Anyone north of s. Seattle on here?
Keith here, from Mt Vernon. No current Fbods just a conglomeration of Chevy powered stuff.
I am working on changing my 406SBC/A3 powered 39 Ford Sedan to LS1/A4 pwr.
Also have a 40 ****** drag car, 53 Stude & hemi Magnum in various stages.
Keith here, from Mt Vernon. No current Fbods just a conglomeration of Chevy powered stuff.
I am working on changing my 406SBC/A3 powered 39 Ford Sedan to LS1/A4 pwr.
Also have a 40 ****** drag car, 53 Stude & hemi Magnum in various stages.
Anyone north of s. Seattle on here?
Keith here, from Mt Vernon. No current Fbods just a conglomeration of Chevy powered stuff.
I am working on changing my 406SBC/A3 powered 39 Ford Sedan to LS1/A4 pwr.
Also have a 40 ****** drag car, 53 Stude & hemi Magnum in various stages.
Keith here, from Mt Vernon. No current Fbods just a conglomeration of Chevy powered stuff.
I am working on changing my 406SBC/A3 powered 39 Ford Sedan to LS1/A4 pwr.
Also have a 40 ****** drag car, 53 Stude & hemi Magnum in various stages.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
TECH Fanatic
Joined: Dec 2004
Posts: 1,881
Likes: 0
From: Yelm, Wa
Head over to the other site thats where most of us hang out now. if you dont know just pm me & I will tell ya.
Teching In
Joined: Jul 2009
Posts: 2
Likes: 0
new hello all im Jake, just recently bought an '01 ws6 with 37k on it.
IM fairly new to cars, i know nothing about motors, i grew up in an autobody shop only know how to make it look pretty haha. so i got a lot to learn
IM fairly new to cars, i know nothing about motors, i grew up in an autobody shop only know how to make it look pretty haha. so i got a lot to learn
Teching In
Joined: Apr 2007
Posts: 42
Likes: 0
From: Mt. Vernon,WA
Should be a couple in my profile. The ****** went to Australia last summer, got tired of dumping $$ into it for 12yrs. Look under 1940 ****** drag car on youtube and go to the bottom of the page. Sound doesn't do it justice but still sounds ok. I haven't been on this site in awhile either.