Pick a CATCH CAN

Reply Subscribe

Thread Tools

Search this Thread

Jul 28, 2009 | 01:58 PM

Soul TKR

Thread Starter

TECH Junkie

iTrader: (4)

Joined: Jun 2004

Posts: 3,543

Likes: 2

From: San Diego, CA

Pick a CATCH CAN

Hey guys, I've been getting some puddling or at least a pretty good amount of oil coating inside my intake manifold lately. The car seems to barely use any oil. But I'm guessing I need a catch can to help fix the problem...

Below are some of the catch cans I've heard of...

Lemme know which one you like, and please give an explanation as to why it's better than the others. Or which ones are comparable and work correctly.

RevExtreme

AMW

Adrenaline

Saikou Michi

Elite Engineering

Mike Norris

lemme know if I'm missing any catch cans that you guys recommend and I'll add them to the list...

Last edited by Soul TKR; Jul 28, 2009 at 08:52 PM.

Jul 28, 2009 | 03:44 PM

shaun

12 Second Club

Joined: Nov 2005

Posts: 1,847

Likes: 0

I got my can from the ws6 store and it does work very well
I can't speak for the others but I like my can

Jul 28, 2009 | 04:39 PM

Striker

TECH Fanatic

iTrader: (1)

Joined: Aug 2007

Posts: 1,613

Likes: 3

Quote:

Originally Posted by shaun

I got my can from the ws6 store and it does work very well
I can't speak for the others but I like my can

Does it work well and how was the install? Any pics?

Jul 28, 2009 | 04:40 PM

Striker

TECH Fanatic

iTrader: (1)

Joined: Aug 2007

Posts: 1,613

Likes: 3

Quote:

Originally Posted by shaun

I got my can from the ws6 store and it does work very well
I can't speak for the others but I like my can

Does it work well, and how was the install? Any pics?

Jul 28, 2009 | 05:25 PM

1Loudz28

TECH Enthusiast

iTrader: (47)

Joined: Aug 2007

Posts: 711

Likes: 0

From: BAY AREA CA

i made mine from a water separator and some fuel line - $15 total i think

Jul 28, 2009 | 06:27 PM

TLewis4095

Banned

iTrader: (10)

Joined: Oct 2004

Posts: 1,265

Likes: 2

From: Bradenton, FL

Quote:

Originally Posted by 1Loudz28

i made mine from a water separator and some fuel line - $15 total i think

The plastic small air compressor unit will trap a small amount, but the vast majority will still get into the intake. Tp be completely effective you need a decent size, it must be metal (AL preferred) for the heat dissipation to condense the vapors/mist to droplets, and have an effective baffel system that prevents droplets from being pulled through.

Jul 28, 2009 | 06:42 PM

ryan@rpm

FormerVendor

iTrader: (5)

Joined: Nov 2002

Posts: 305

Likes: 0

From: Bunn, NC

I got my Billet catch can from Vengance and it worked great ! Bolts right to the side of the head and is of great quality !

6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'

Brett Foote

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Pouria Savadkouei

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Verdad Gallardo

7 Most Reliable High-Performance Engines GM Has Ever Built

Verdad Gallardo

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Jul 29, 2009 | 12:36 AM

Soul TKR

Thread Starter

TECH Junkie

iTrader: (4)

Joined: Jun 2004

Posts: 3,543

Likes: 2

From: San Diego, CA

list updated...

Jul 29, 2009 | 09:07 AM

#10

Striker

TECH Fanatic

iTrader: (1)

Joined: Aug 2007

Posts: 1,613

Likes: 3

I think that they would all work the same. The real question is, which one has the best and easiest install?

Jul 29, 2009 | 09:11 AM

#11

Nubbz33

Teching In

iTrader: (10)

Joined: Oct 2006

Posts: 40

Likes: 0

From: Delaware

I have the elite eng. one and its is a very nice catch can. They all install about the same, and it works great. Its also easy to empty.

Jul 29, 2009 | 09:13 AM

#12

Striker

TECH Fanatic

iTrader: (1)

Joined: Aug 2007

Posts: 1,613

Likes: 3

I think the Norris Motorsports one bolts up right against the head. I like this.

Jul 29, 2009 | 09:43 AM

#13

ShortChevy

12 Second Club

iTrader: (21)

Joined: Jun 2007

Posts: 1,102

Likes: 0

From: Muskegon, MI

That elite one looks really nice, looks like a good setup as well. Little on the pricey side but if it works good I'll buy it.

Jul 29, 2009 | 12:08 PM

#14

Striker

TECH Fanatic

iTrader: (1)

Joined: Aug 2007

Posts: 1,613

Likes: 3

Im confused on which of the norris cans to go with! They all do good work by the looks of it.

Jul 29, 2009 | 05:56 PM

#15

405HP_Z06

TECH Addict

iTrader: (11)

Joined: Jun 2003

Posts: 2,215

Likes: 19

From: Arlington, Tx

Currently, the only two effective catch can manufacturers on the market are Saikou Michi or RevXtreme.

If you haven't already, check out these threads:

https://ls1tech.com/forums/generatio...outing-ok.html

https://ls1tech.com/forums/generatio...ls2-427-a.html

Last edited by 405HP_Z06; Jul 29, 2009 at 10:50 PM.