WARNING LOTS OF PIC! 370 CI build
Thread Starter
9 Second Club
iTrader: (17)
Joined: Feb 2008
Posts: 1,146
Likes: 1
From: Texarkana, Texas
Some goodies in today and some more comming in tomorrow 
.
Cleaning up the back prostars
Mahle flat-top 2cc's
6.125 H Beam rods
Polished crank
More and better pictures tomorrow.
.Cleaning up the back prostars
Mahle flat-top 2cc's
6.125 H Beam rods
Polished crank
More and better pictures tomorrow.
Looking good!! Looks like your doing a really good job putting together a nice collection of good parts. I really like that BMR Extreme torque arm. I feel those are one of the best torque arms out there. Keep up the good work and good luck with your project.
-Dave
-Dave
Thread Starter
9 Second Club
iTrader: (17)
Joined: Feb 2008
Posts: 1,146
Likes: 1
From: Texarkana, Texas
Here's the new stuff as of today.
The 6.0L bored .030 over...
Front prostar look alikes made by Summit. These things look GREAT and are made solid. I recommend these to anyone looking for some prostars at a great price.
Back prostars with the new 275/60/15's mounted
.
Two motors I have to build and put in customers cars before I can start on my build
. I've been working my *** off getting these together with some help of a buddy.
The 6.0L bored .030 over
...Front prostar look alikes made by Summit. These things look GREAT and are made solid. I recommend these to anyone looking for some prostars at a great price.
Back prostars with the new 275/60/15's mounted
.Two motors I have to build and put in customers cars before I can start on my build
. I've been working my *** off getting these together with some help of a buddy. LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Thread Starter
9 Second Club
iTrader: (17)
Joined: Feb 2008
Posts: 1,146
Likes: 1
From: Texarkana, Texas
Couldn't come up with an extra $1,000 for a 4" crank at the time . I may build it for boost eventually if I ever tear back into it but that is (hopefully) a long time from now. Until then I'll just be running a 100-150 shot through it.
. I may build it for boost eventually if I ever tear back into it but that is (hopefully) a long time from now. Until then I'll just be running a 100-150 shot through it. 
Thread Starter
9 Second Club
iTrader: (17)
Joined: Feb 2008
Posts: 1,146
Likes: 1
From: Texarkana, Texas
11 Second Club
iTrader: (32)
Joined: Jan 2006
Posts: 3,701
Likes: 2
From: Southaven, MS (near Memphis, TN)
That took you long enough to get what I said..haha
When you replied the first time to my post I was like ..
The build looks like it's going good! I agree with you on those Summit Stars... I had some on my car. They might weigh a little bit more but barely any grinding and they look the same!
When you replied the first time to my post I was like ..
The build looks like it's going good! I agree with you on those Summit Stars... I had some on my car. They might weigh a little bit more but barely any grinding and they look the same!
Thread Starter
9 Second Club
iTrader: (17)
Joined: Feb 2008
Posts: 1,146
Likes: 1
From: Texarkana, Texas
Their are some 370 ci floating around that will compete with some 408ci motors out there but they are deep in the backwoods being setup. Stay tuned!!! Seriously if you match it up correctly the 370ci motor can play with the big boys.
Once the rear shocks and nitrous kit are on i'll have "StreetSilverado photography" catch some pictures of my bitch standing on the bumper
and since powell is not here i'm going to swipe is heads and race StreetSilverado for his girlfriend Thread Starter
9 Second Club
iTrader: (17)
Joined: Feb 2008
Posts: 1,146
Likes: 1
From: Texarkana, Texas
It's not cheaper to buy it already built. You can save yourself alot of cash by doing it yourself.
Their are some 370 ci floating around that will compete with some 408ci motors out there but they are deep in the backwoods being setup. Stay tuned!!! Seriously if you match it up correctly the 370ci motor can play with the big boys.
Once the rear shocks and nitrous kit are on i'll have "StreetSilverado photography" catch some pictures of my bitch standing on the bumper and since powell is not here i'm going to swipe is heads and race StreetSilverado for his girlfriend
Their are some 370 ci floating around that will compete with some 408ci motors out there but they are deep in the backwoods being setup. Stay tuned!!! Seriously if you match it up correctly the 370ci motor can play with the big boys.
Once the rear shocks and nitrous kit are on i'll have "StreetSilverado photography" catch some pictures of my bitch standing on the bumper
and since powell is not here i'm going to swipe is heads and race StreetSilverado for his girlfriend ...we are FINALLY done with that ol' Trans Am's motor and about to start stabbing it in. Them cold drinks you talked about last time sure do sound good right about now Thread Starter
9 Second Club
iTrader: (17)
Joined: Feb 2008
Posts: 1,146
Likes: 1
From: Texarkana, Texas
Another update and very surprised myself . We started on my motor earlier than I had planned, but thats a good thing for me! Anyway all I have to pick up now is my cam, oil pump, and lifters. I should be getting a 3rd member out of a 9" tomorrow to put mine together with from a buddy hopefully that will work out. After all that I will be missing ONE thing to have every part I need to put my car back together, a damn shifter linkage bracket . So if anyone has one laying around please let me know!
Got the crank and new ARP main studs in and torqued
Also got all the rings gapped for a 300 shot
And here's all the pistons rods and all that good stuff that I'll be putting together tomorrow
. We started on my motor earlier than I had planned, but thats a good thing for me! Anyway all I have to pick up now is my cam, oil pump, and lifters. I should be getting a 3rd member out of a 9" tomorrow to put mine together with from a buddy hopefully that will work out. After all that I will be missing ONE thing to have every part I need to put my car back together, a damn shifter linkage bracket . So if anyone has one laying around please let me know!Got the crank and new ARP main studs in and torqued
Also got all the rings gapped for a 300 shot
And here's all the pistons rods and all that good stuff that I'll be putting together tomorrow
Last edited by StreetSilverado; Apr 6, 2011 at 12:50 AM.