[/IMG] 
[/IMG]
1994 camaro z502 project
Jelly257: My cowl looks like yours does as well. I had originally cut something like LS135th's did but it was way to hard to reach everything. I test fit the motor and I knew right away most of it had to go. Did you chop the cowl all the way to the 90 degree bend into the fire wall?
Can you pull the distributor with the engine in the car?
Looks good
,
~Jim~
Can you pull the distributor with the engine in the car?
Looks good
,~Jim~
Thread Starter
Teching In
Joined: Apr 2009
Posts: 28
Likes: 0
From: camarillo ca
does any in cali know someone who does header work or sell a header that will fit my car beside leomns header i really dont want to speand 1500 on a set of header. thats my cage money right there
Thread Starter
Teching In
Joined: Apr 2009
Posts: 28
Likes: 0
From: camarillo ca
got the header in not to much fitment problems used a set of hooker 2455s had to smash down #4 and # 7 tube to make fit cause they were hititng the k member but other wise took about 3 hours to install still have to deal with stearing but here some more pics
and still have about 4in ground clearance
and still have about 4in ground clearance
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
Teching In
Joined: Apr 2009
Posts: 28
Likes: 0
From: camarillo ca
started on the fuel system to day got the fuel tank out of the car and put my fittings in for the fuel line here pics
put -8an fitting in sould be good. ill post more when i finnsh the rest of the fuel system
put -8an fitting in sould be good. ill post more when i finnsh the rest of the fuel system
Thread Starter
Teching In
Joined: Apr 2009
Posts: 28
Likes: 0
From: camarillo ca
yes u can get to the distributor.
I got the thing started up tonight about an hour ago. Almost done. Now its off to get caged. then you'll see it on the streets in the 805
all have the start up vid and finnish engine and wiring pic some time this week
I got the thing started up tonight about an hour ago. Almost done. Now its off to get caged. then you'll see it on the streets in the 805
all have the start up vid and finnish engine and wiring pic some time this week
