BMW Headlights on my 89 CAMARO!
BMW Headlights on my 89 CAMARO! I just finished installing some BMW E36 DEPO Headlights on my 89 camaro! took a lot of time but finally got them in and working. Had to make my own wire harness in order to make these lights work. They sure do add another look to the 3rd gen. Check it out
Copy & Paste Moderator
Joined: Apr 2002
Posts: 9,764
Likes: 208
From: Eastern MA
Nice work. I'm putting this in the Lighting FAQ.
What was involved in making them fit?
Looks like the low beam is a projector. What bulb does it take? Is it HID? Or is that the older ellipsoid headlights (precursor to modern projectors)? I think I see fluting on the lower part of the lens in front of the curved projector lens. I think these are ellipsoid.
Can you post wall shots and down the road shots?
Here is a similar looking headlight that uses H7 projectors:
http://cgi.ebay.com/ebaymotors/92-98...Q5fAccessories
Price is nice too at $170 for the pair.
I just found those out of curiosity.
Here they are in chrome:
http://cgi.ebay.com/ebaymotors/92-98...Q5fAccessories
I wonder what the light output of these are as well. Nothing in the ad.
What was involved in making them fit?
Looks like the low beam is a projector. What bulb does it take? Is it HID? Or is that the older ellipsoid headlights (precursor to modern projectors)? I think I see fluting on the lower part of the lens in front of the curved projector lens. I think these are ellipsoid.
Can you post wall shots and down the road shots?
Here is a similar looking headlight that uses H7 projectors:
http://cgi.ebay.com/ebaymotors/92-98...Q5fAccessories
Price is nice too at $170 for the pair.
I just found those out of curiosity.
Here they are in chrome:
http://cgi.ebay.com/ebaymotors/92-98...Q5fAccessories
I wonder what the light output of these are as well. Nothing in the ad.
Last edited by VIP1; Aug 19, 2009 at 11:14 PM.
Just a lot of measuring. I had to buy some US Version Headlights and use that to measure where the headlights were going to since the US Headlights are different and smaller than the EURO type lights. I used a Dremel with a metal cutting wheel and a saw saw. Had to make my own wire harness to make the new lights work with my factory setup. Had to cut the bumper in order for the headlights to sit right in and flush with the bumper. Still not done yet. I still need to fab something up to keep those lights bolted down.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo They are BMW E36 Depo Projectors
http://cgi.ebay.com/ebaymotors/BMW-E...Q5fAccessories
Minus the angel eyes
used the same guy from EBAY! Great stuff just crappy communication
I installed LED angel eyes from UM-Nitza
http://www.umnitza.com/umnitza-bpred...es-p-1198.html
http://cgi.ebay.com/ebaymotors/BMW-E...Q5fAccessories
Minus the angel eyes
used the same guy from EBAY! Great stuff just crappy communication
I installed LED angel eyes from UM-Nitza
http://www.umnitza.com/umnitza-bpred...es-p-1198.html
they actually point straight. But i still need to adjust them They are very easy to adjust. Very easy
The light output is awesome! SO MUCH BETTER than my stock ones! Im using the Sliver Star H1 bulbs in both high and low beams. I can see when i drive now lol
The light output is awesome! SO MUCH BETTER than my stock ones! Im using the Sliver Star H1 bulbs in both high and low beams. I can see when i drive now lol
Last edited by ramair21; Aug 19, 2009 at 11:29 PM.
Copy & Paste Moderator
Joined: Apr 2002
Posts: 9,764
Likes: 208
From: Eastern MA
So they are the older-style ellipsoid headlights. Can you post wall shots so we can see the beam pattern. I've never seen the beam pattern of the older-style ellipsoid headlights before.
Last edited by VIP1; Aug 19, 2009 at 11:53 PM.
