i have huge tweeters. suggestions?
i have huge tweeters. suggestions? i recently installed a set of infinity reference components in my fiero, the 5.25" set.
so i figured id upgrade for my camaro and got some infinity kappa 60.9cs's.
my initial plan was to flush mount the tweeters somewhere on the upper door panel, or ideally surface mount them on the triangle piece that covers side view mirrors.
but dayum, theyre huge. i ended up temporarily surface mounting them near the window crank hole, since it wouldnt cause any permanant marks. theyre just really really ugly. i mean really ugly.
has anyone else dealt with these before? think they would fit in those tweeter pods in the other thread?
so i figured id upgrade for my camaro and got some infinity kappa 60.9cs's.
my initial plan was to flush mount the tweeters somewhere on the upper door panel, or ideally surface mount them on the triangle piece that covers side view mirrors.
but dayum, theyre huge. i ended up temporarily surface mounting them near the window crank hole, since it wouldnt cause any permanant marks. theyre just really really ugly. i mean really ugly.
has anyone else dealt with these before? think they would fit in those tweeter pods in the other thread?
Staging Lane
Joined: Aug 2009
Posts: 85
Likes: 0
From: Phoenix, AZ
hrmm.. those are some big tweeters you have.. 'the better to hear with, my dear'.
just ordered those ones.. so. i'll have to figure out what i'm gonna do, was gonna mount them up in mirror area on the doors, but not sure that'll work now. maybe have to order kickpanels.
just ordered those ones.. so. i'll have to figure out what i'm gonna do, was gonna mount them up in mirror area on the doors, but not sure that'll work now. maybe have to order kickpanels.
Trending Topics
Here's where I flush mounted my tweeters , I used a large hole saw drill bit that's just a little smaller then the flush mount cup the tweeter fits in and my dremel, mostly on the back side of the door panel .
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Staging Lane
Joined: Aug 2009
Posts: 85
Likes: 0
From: Phoenix, AZ
while i don't like the idea of cutting into my door panels, i definitely like the way these look. my have to consider this.
i like the idea of the tweeters in the pillars, but i dont know if mine will fit.
do you happen to know the diameter and mounting depth of yours?
i also thought about putting them in the door panel in that same spot but i didnt want to make such a big hole and find out theyre too deep or i dont like em.
i just did em up in photoshop. colored the base with the light gray from the door panel and the grille with the color of the stock grille. they look pretty decent like that. anyone know where to get color matched interior paints?
(ive also since fixed the passenger side buttons.)
do you happen to know the diameter and mounting depth of yours?
i also thought about putting them in the door panel in that same spot but i didnt want to make such a big hole and find out theyre too deep or i dont like em.
i just did em up in photoshop. colored the base with the light gray from the door panel and the grille with the color of the stock grille. they look pretty decent like that. anyone know where to get color matched interior paints?
(ive also since fixed the passenger side buttons.)
Last edited by notsonic; Sep 6, 2009 at 02:12 PM.
