LS6/T56 1993 Mazda RX7 - Pristine!
LS6/T56 1993 Mazda RX7 - Pristine! Overview
- 1993 FD RX7, Montego Blue
- LS6 and Built T56
- 99 spec
Drivetrain
- LS6 with ~16,000 miles out of a 2001 z06 Corvette
- ARP rod bolts
- Built T56 with less than ~100 miles
- Patrick G custom spec'd camshaft (232/236 ~.600 lift 111lsa)
- Custom 4 inch cold air intake
- JTR 1 3/4th headers
- Apexi N1 Dual exhaust
- LS6 heads and intake manifold
- Textralia OZ700 clutch and lightened flywheel (brand new)
- TII differential with 4.33 gears
Chassis
- Hinson premium mounting equipment
- Koni yellows and H&R springs
- Drilled and slotted rotors
Exterior
- Authentic 99 spec front bumper and taillights
- Rotary Extreme sideskirts (Apexi knockoffs)
- Enkei Aegis Wheels - 18x8.5 and 18x9.5
- Custom kill switch, with battery located in hatch
Why are you selling?
I need the money to get my career going. It's hard to sell such a beautiful car, especially since it just got finished, but it took much longer than I anticipated to get done (doesn't it always?) and I'm in a place right now where I can't enjoy it because I need the money.
Issues
The reason my asking price is so low is because this car is NOT 100% done. The car runs and drives perfectly, but there are a few minor things that still need to be done for this car to be a daily driver, including:
- Interior - The interior is not 100% put back together yet. I will be ordering a shift ****, a shift boot, and an ebrake boot this week. I have the AC surround plastics, but they are not installed. The car is missing the plastics that go behind the shifter. However, the seats and the rest of the interior is in good shape and will look nice when put back together.
- Radiator and filter - The car is VERY low to the ground, and the radiator and intake filter are the two lowest points besides the front bumper. I would recommend a metal plate be made to at least protect the radiator from scraping.
- Other issues - I just threw the front bumper back on, and it needs to be aligned better, you can probably tell this from the pics. The headlight motors don't pop up/down when you turn on the lights. The A/C isn't installed yet (but the powersteering is, and works). The car could use a better tune, it is running very rich. It has a conservative tune on it from my brothers old H/C LS1 right now. The tach and speedo are not hooked up. There is a small exhaust leak. The car needs an alignment, and a more powerful battery.
Pictures
Price REDUCED
$18,000.
Contact
Email - pacojr37@yahoo.com. The car is located in St. Louis, MO.
- 1993 FD RX7, Montego Blue
- LS6 and Built T56
- 99 spec
Drivetrain
- LS6 with ~16,000 miles out of a 2001 z06 Corvette
- ARP rod bolts
- Built T56 with less than ~100 miles
- Patrick G custom spec'd camshaft (232/236 ~.600 lift 111lsa)
- Custom 4 inch cold air intake
- JTR 1 3/4th headers
- Apexi N1 Dual exhaust
- LS6 heads and intake manifold
- Textralia OZ700 clutch and lightened flywheel (brand new)
- TII differential with 4.33 gears
Chassis
- Hinson premium mounting equipment
- Koni yellows and H&R springs
- Drilled and slotted rotors
Exterior
- Authentic 99 spec front bumper and taillights
- Rotary Extreme sideskirts (Apexi knockoffs)
- Enkei Aegis Wheels - 18x8.5 and 18x9.5
- Custom kill switch, with battery located in hatch
Why are you selling?
I need the money to get my career going. It's hard to sell such a beautiful car, especially since it just got finished, but it took much longer than I anticipated to get done (doesn't it always?) and I'm in a place right now where I can't enjoy it because I need the money.
Issues
The reason my asking price is so low is because this car is NOT 100% done. The car runs and drives perfectly, but there are a few minor things that still need to be done for this car to be a daily driver, including:
- Interior - The interior is not 100% put back together yet. I will be ordering a shift ****, a shift boot, and an ebrake boot this week. I have the AC surround plastics, but they are not installed. The car is missing the plastics that go behind the shifter. However, the seats and the rest of the interior is in good shape and will look nice when put back together.
- Radiator and filter - The car is VERY low to the ground, and the radiator and intake filter are the two lowest points besides the front bumper. I would recommend a metal plate be made to at least protect the radiator from scraping.
- Other issues - I just threw the front bumper back on, and it needs to be aligned better, you can probably tell this from the pics. The headlight motors don't pop up/down when you turn on the lights. The A/C isn't installed yet (but the powersteering is, and works). The car could use a better tune, it is running very rich. It has a conservative tune on it from my brothers old H/C LS1 right now. The tach and speedo are not hooked up. There is a small exhaust leak. The car needs an alignment, and a more powerful battery.
Pictures
Price REDUCED
$18,000.
Contact
Email - pacojr37@yahoo.com. The car is located in St. Louis, MO.
Last edited by Squishmytomato; Oct 14, 2009 at 01:29 AM.
Teching In
Joined: Jan 2009
Posts: 3
Likes: 0
dude. lol i live in alton. let me come nut all over it.
please dont tell me you posted this up on drift stl.all the people on the forum are kinda gay.
i got banned because i didnt change the name of a thread i made.
i told the mod that he thinks he has power when really he lives in his moms basement. that might have had something to do with it to.
anywayyyyyy, bump for a clean car very close to me.
please dont tell me you posted this up on drift stl.all the people on the forum are kinda gay.
i got banned because i didnt change the name of a thread i made.
i told the mod that he thinks he has power when really he lives in his moms basement. that might have had something to do with it to.
anywayyyyyy, bump for a clean car very close to me.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Bump for ya.
I can vouch for the engine and tranny as used to be mine. Engine is low mileage and came out of my Z06. Tranny came out of my buddies SS Camaro and I had it built. Good parts in a cool car.
I can vouch for the engine and tranny as used to be mine. Engine is low mileage and came out of my Z06. Tranny came out of my buddies SS Camaro and I had it built. Good parts in a cool car.
