Announcing a new LS-series "How-to" publication:
How does this book compare to " How to Rebuild GM LS-Series Engines" by Cartech. I ask because I just got the above book and am curious if yours will cover any special tricks or how-to's that I need to know for my H/C swap that the above does not cover,
Thanks
Thanks
Thread Starter
Joined: Nov 2001
Posts: 3,043
Likes: 0
From: Texas and Qatar
CranMaro; The F-body "guidebook" isn't to be viewed as a "how-to" book such as the LS-engine book, rather that one is more of an informational book helping to decide which parts are needed, for which application and when required. It will mainly cover engine externals such as bolt-ons, but really cover the entire chassis, things like torque converter selection, header choices, gear ratios and rear-ends. It basically lines out a path for each area of the car for the differing types of racing the user is performing.
LilJay; No flycutting pics, I wanted to include it but just didn't have room. The stock LS shortblock mechanical procedures I lined out are mainly what deviate from the aftermarket parts typically used in a buildup - such as piston and connecting rod information as differing from pistons/rods such as Wiseco and Callies. The PtoV, cylinder head torquing, camshaft degreeing and pushrod length/lifter preload are all included though.
Mark; I don't know if they plan on an electronic version, it would be nice, but I'm sure copyright protection is harder to police at that level. I think amazon.com would put it in kindle if they get enough requests for it.
Titan; I'm not sure how it compares to Chris Werner's LS book, judging by his GMHTP engine articles I would say its probably pretty well written. I meant to pick up his book and Chris Endres's (my editor) book for last minute ideas before turning in mine, but never had a chance. Mine is mainly based on firsthand shop experience (~10 years worth of LS engines, and ~16 total years working on cars/engines), with additional pertinent information as necessary for certain problem areas...cough...-oil pump o-ring-...cough...
Thanks for the congrats and feedback.
LilJay; No flycutting pics, I wanted to include it but just didn't have room. The stock LS shortblock mechanical procedures I lined out are mainly what deviate from the aftermarket parts typically used in a buildup - such as piston and connecting rod information as differing from pistons/rods such as Wiseco and Callies. The PtoV, cylinder head torquing, camshaft degreeing and pushrod length/lifter preload are all included though.
Mark; I don't know if they plan on an electronic version, it would be nice, but I'm sure copyright protection is harder to police at that level. I think amazon.com would put it in kindle if they get enough requests for it.
Titan; I'm not sure how it compares to Chris Werner's LS book, judging by his GMHTP engine articles I would say its probably pretty well written. I meant to pick up his book and Chris Endres's (my editor) book for last minute ideas before turning in mine, but never had a chance. Mine is mainly based on firsthand shop experience (~10 years worth of LS engines, and ~16 total years working on cars/engines), with additional pertinent information as necessary for certain problem areas...cough...-oil pump o-ring-...cough...
Thanks for the congrats and feedback.
Thread Starter
Joined: Nov 2001
Posts: 3,043
Likes: 0
From: Texas and Qatar
Its only available to ship right "now" from Motorbooks, which is the first link above. I'm sure some sponsors will have it, probably about the same time Amazon.com starts shipping it. I believe I will be able to have it available through TSP and SDPC if possible, I will update the post if/when that happens. 
I know another book that I going to add to my collection. I am going to have to order it though. Don't think I will be able to find it on the shelf at anytime up here in Kodiak lol Congrats Joseph
Congrats Joseph LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
Joined: Nov 2001
Posts: 3,043
Likes: 0
From: Texas and Qatar
Where's my free copy? Seriously.
__________________
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Thread Starter
Joined: Nov 2001
Posts: 3,043
Likes: 0
From: Texas and Qatar
Thanks! I hope you find it useful and informational.
I think so.
Let me know how you like it?!
Don't you get enough free knowledge outta me already? Cool! Let me know what you think.
Also if the guys who order from Amazon could write up a short 1-2 sentence review when it allows you, I would greatly appreciate it. I'm not exactly sure why there are two separate release dates, but I just received a few copies I ordered from Motorbooks today, it took right at 5 days via ground.
Thanks for the congrats and feedback, it'll keep me going to finish the 2nd book, I think I can finally see the light at the end of the tunnel now.
