Why did I pick engineering as my major?
I'm guessing you are around 2nd year with those classes? When I got into the "major specific" classes, I found it to be much easier. You really start to "learn how to learn" the farther you go. The past 3 semesters or so, I didn't study NEARLY as much, and I made better grades. If you understand the material in class, the test stuff comes naturally. Also, solutions manuals are your friend. Not so much that you don't have to do the homework, but you have a guide right in front of you to explain what's going on.
I just graduated in May and I have an awesome job. Try to do some co-op's during the summer/etc and get in as much experience as you can. I remember thinking I would never get through it. It really gets stressful when you take classes during your last year, and if you fail one, it will put off your graduation for a whole year. But, by that point, if you are making an effort and the professors know it, it's pretty damn hard not to pass. I could have skipped all the tests in a few classes and my professors would have let me make it out somehow.
PS - I was making $29/hr the last co-op I worked.
Last edited by TheBlurLS1; Sep 24, 2009 at 11:27 PM.
and also to THEBLURLS1 you went to Lamar University right if so got any tips for a student of mechanical engineer
Trending Topics
The Best V8 Stories One Small Block at Time
You should reconsider what you really LOVE and have a passion for, rather than thinking about dollar bills after you graduate. No matter how much money engineers make, I would rather be in a nice cozy office programming the next AAA title for the XBOX 360.
Hell most of the mech engineers think it is a joke how little of there school knowledge gets used they just plan meetings and do basic algebra when math is required.
Keep pushing through and nothing but good things can come from finishing your degree.
Last edited by tittan1500; Sep 25, 2009 at 02:10 AM.
Statics is tough. I hated that class (probably cause' it was taught by julio G dicks) .. i'm in dynamics right now and I like it a lot more. You apply some basic concepts from statics but you should be able to grasp it a lot easier.
E&M, circuits and devices, power systems, digital electronics.. those classes were cake to me though.
Damn, ya caught me!
ME is such a big field you learn a ton of stuff in school and then only use 10% of it when you get out. Everything else is learned on the job and is specific to the company/field your working for.
The day before graduation you'll have more general information than you'll have for the rest of your life!






