Stall Converter?
Thread Starter
Staging Lane
Joined: Jan 2009
Posts: 88
Likes: 0
From: south dakota
Stall Converter? i am looking to put a 3600 stall in my 99 trans am. i am wondering what the difference in a lock up stall and a lock up is.. what is the best one to go with. any help is greatly appreciated!!
"All Motor 9 Second club member"
iTrader: (60)
Joined: Nov 2001
Posts: 3,235
Likes: 2
From: On the Bumper!
If you are running a stock transmission then you have a 4L60E which has a lock up type converter. If you buy a quality 3600 stall for your car it will be a lock up converter as in when you are in Drive or OD and cruising the computer will command the converter to lock up and there will be no slip from the engines flexplate to the rear tires. It allows you to cruise at hiway speeds with the engine maintaining low rpms which nets great fuel economy.
Some people force their converter to lock up while on a dyno for accurate HP readings and for tuning purposes. Some people also force their TC to lock up at WOT for performance enhancement, but that's primarily for the forced induction guys or guys with big shots of nitrous. The average Joe would not benefit from locking the TC up at WOT.
A quality converter will have a very durable and proven lock up clutch material and/or multiple lock up clutch discs. A poorly built budget converter can result in the clutch material burning up prematurely or breaking loose and sending clutch material through the transmission. This is something you do not want to experience. Do it right the first and you will be glad you did.
A stall converter is hands down the best bang for the buck IMO. A 3600 stall will turn your car into a whole different animal (in a very good way).
I have test many different stall converters and it's no secret I am partial to Circle D Specialties converters. I've data logged many track passes testing the efficiency of them and I've seen first hand the quality of the components and workmanship that goes into their converters.
I hope this helps.
G/L
Some people force their converter to lock up while on a dyno for accurate HP readings and for tuning purposes. Some people also force their TC to lock up at WOT for performance enhancement, but that's primarily for the forced induction guys or guys with big shots of nitrous. The average Joe would not benefit from locking the TC up at WOT.
A quality converter will have a very durable and proven lock up clutch material and/or multiple lock up clutch discs. A poorly built budget converter can result in the clutch material burning up prematurely or breaking loose and sending clutch material through the transmission. This is something you do not want to experience. Do it right the first and you will be glad you did.
A stall converter is hands down the best bang for the buck IMO. A 3600 stall will turn your car into a whole different animal (in a very good way).
I have test many different stall converters and it's no secret I am partial to Circle D Specialties converters. I've data logged many track passes testing the efficiency of them and I've seen first hand the quality of the components and workmanship that goes into their converters.
I hope this helps.
G/L
Last edited by TXCAMSS; Sep 28, 2009 at 02:33 PM. Reason: typos
I just put a Yank SS3600 in mine. I'm all bolt ons, no cam yet. I love the way it drives and I second TXCAMSS saying "A stall converter is hands down the best bang for the buck IMO. A 3600 stall will turn your car into a whole different animal (in a very good way)."
"All Motor 9 Second club member"
iTrader: (60)
Joined: Nov 2001
Posts: 3,235
Likes: 2
From: On the Bumper!
It won't hurt a thing except traction.lol. You are doing it right by going with the stall first and then the cam. You will love it!
"All Motor 9 Second club member"
iTrader: (60)
Joined: Nov 2001
Posts: 3,235
Likes: 2
From: On the Bumper!
This an area that I would not cheap out on. TCI as a company offers some great products, but I would not put one of their converters in any car I own. You have too many great sponsors right here that sell high quality converters that will likely last the life of your car. I would hold off and save up until you can swing the $$ for a good quality stall converter. When a budget converter fails, it often takes the transmission with it. Just my .02
Trending Topics
Three things that dont mix GOOD-FAST-CHEAP. Spend the money as the tx said and buty a quality piece. The 3600 is one of the best mods you can do for your car dollar for dollar. Our SRLS series 9.5" billet set at 36 would do the trick. All with a 3 year warranty.
Greg
Greg
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
I have test many different stall converters and it's no secret I am partial to Circle D Specialties converters. I've data logged many track passes testing the efficiency of them and I've seen first hand the quality of the components and workmanship that goes into their converters.
I hope this helps.
G/L
10 Second Club
Joined: Mar 2008
Posts: 1,034
Likes: 1
From: Cape Girardeau, Missouri
I can only speek from experience, ive got an EDGE 3600, 6 of my friends are also running edge stalls and no problems from any of them. I love my stall, and their customer service was great.
circle, converter, converters, hp, lock, lose, ratings, specialties, stall, stalls, trans, transmission, transmissions, tuning, wiki
