tons of lt1/ls1/camaro parts
tons of lt1/ls1/camaro parts LS1 STUFF
241 casting ls1 heads 75 each set
ls1 fuel rails 40
injectors 34 lb/hr and 60 psi (flow tested with sheet) 250
z06 cam 150
stock ls1 rockers 60
stock maf 60
flexplate 50
2000 black leather door panels perfect...250
passenger ttop 75
stock delco amp...40
stock monsoon radio....75
REARENDS/SUSPENSION
boxed bmr LCA with poly/poly bushngs 75 bux
lt1 steering rack 70 no leaks CLEAN!
ive got 4 sets of lt1 backing plates...
3 channel 40 bux each set
4 channel 55 bux each set
lt1 front brakes with spindles rotors hubs and calipers 75 bux
3.73 rear makes some whining 300
stock front springs from lt1 car 20
rear shocks 20 a pair
LT1 Parts
94 lt1 timing cover...25
95 + timing cover...30
cc306 6k miles.....210 shipped
egr valves 10
lt1 shortblock needs rebuild...150
lt1 oil pan...40
lt1 aluminum heads...200
lt1 intake manifold...65
lt1 injectors...35
lt1 6 speed flywheel...50
complete lt1 motor spun bearing needs rebuild 425
also have many interrior pieces from parting out a 1999 and 2000 z28
full power doors
camaro hatches
rear bumper
couple dashes with blown airbags
brake lines
fuel lines
gas tanks
k members
upper and lower control arms
struts
shocks
spindles
brakes
steering columns
interrior pieces
complete tan interrior/seats/plastics ect
swaybars phb's lca's
359 ci LT1 this shortblock is from Jim Moran aka "INTMD8" His car was well known for the fact that it was a very clean streetable(A/C, T56, full interior) turbo car for the power it was making. To give you an idea, with this shortblock he dynoed 890rwhp/855rwtq, ran a best of 9.68@146, and did 199mph in the standing mile.
Specs:
359ci LT1. 3.5in stroke forged Eagle crank, 6.0in Eage H-beam rods, 4.040 bore CP reverse dome pistons -23cc., Hellfire rings, Clevite H bearings, Internally balanced. Block has 3 center mains splayed 4 bolt. It was freshly rebuilt when I purchased it, including an align hone, new bearings/rings, and the crankshaft was turned .010 under.
asking $1999
1998 chev Blazer 4x4 150k miles red exterrior grey leather fully loaded heated seats...needs a few small things such as door switch(keeps inside lights on) and one speaker doesnt work
$1999
wtb/trade
ls1 6 speed /twin disk clutch
hardened pushrods ls1nstock leingth
powerglide/converter/shifter
50mm wastegate
t4 76mm or bigger turbo
eboost 2
241 casting ls1 heads 75 each set
ls1 fuel rails 40
injectors 34 lb/hr and 60 psi (flow tested with sheet) 250
z06 cam 150
stock ls1 rockers 60
stock maf 60
flexplate 50
2000 black leather door panels perfect...250
passenger ttop 75
stock delco amp...40
stock monsoon radio....75
REARENDS/SUSPENSION
boxed bmr LCA with poly/poly bushngs 75 bux
lt1 steering rack 70 no leaks CLEAN!
ive got 4 sets of lt1 backing plates...
3 channel 40 bux each set
4 channel 55 bux each set
lt1 front brakes with spindles rotors hubs and calipers 75 bux
3.73 rear makes some whining 300
stock front springs from lt1 car 20
rear shocks 20 a pair
LT1 Parts
94 lt1 timing cover...25
95 + timing cover...30
cc306 6k miles.....210 shipped
egr valves 10
lt1 shortblock needs rebuild...150
lt1 oil pan...40
lt1 aluminum heads...200
lt1 intake manifold...65
lt1 injectors...35
lt1 6 speed flywheel...50
complete lt1 motor spun bearing needs rebuild 425
also have many interrior pieces from parting out a 1999 and 2000 z28
full power doors
camaro hatches
rear bumper
couple dashes with blown airbags
brake lines
fuel lines
gas tanks
k members
upper and lower control arms
struts
shocks
spindles
brakes
steering columns
interrior pieces
complete tan interrior/seats/plastics ect
swaybars phb's lca's
359 ci LT1 this shortblock is from Jim Moran aka "INTMD8" His car was well known for the fact that it was a very clean streetable(A/C, T56, full interior) turbo car for the power it was making. To give you an idea, with this shortblock he dynoed 890rwhp/855rwtq, ran a best of 9.68@146, and did 199mph in the standing mile.
Specs:
359ci LT1. 3.5in stroke forged Eagle crank, 6.0in Eage H-beam rods, 4.040 bore CP reverse dome pistons -23cc., Hellfire rings, Clevite H bearings, Internally balanced. Block has 3 center mains splayed 4 bolt. It was freshly rebuilt when I purchased it, including an align hone, new bearings/rings, and the crankshaft was turned .010 under.
asking $1999
1998 chev Blazer 4x4 150k miles red exterrior grey leather fully loaded heated seats...needs a few small things such as door switch(keeps inside lights on) and one speaker doesnt work
$1999
wtb/trade
ls1 6 speed /twin disk clutch
hardened pushrods ls1nstock leingth
powerglide/converter/shifter
50mm wastegate
t4 76mm or bigger turbo
eboost 2
Last edited by daniel6718; Oct 9, 2009 at 08:45 AM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
looking for interior door panels in ebony with door bezels and control switches
pics to truekoa@gmail.com
also where in garland are you? Im heading up there this weekend to pick up some stuff could prob pick it up.
thx
pics to truekoa@gmail.com
also where in garland are you? Im heading up there this weekend to pick up some stuff could prob pick it up.
thx
TECH Enthusiast
iTrader: (10)
Joined: Jan 2008
Posts: 637
Likes: 0
From: Texas/Somewhere in Southwest Asia
Do you happen to have the rear seat striker posts, the ones that bolt into the tabs and the seat latch locks around them? Thanks.
-SS
-SS
Last edited by hotrodscrap; Nov 4, 2009 at 10:45 AM.
