Our 2010 is almost ready for the memphis shoot out. (Pics)
Our 2010 is almost ready for the memphis shoot out. (Pics) Well it sure took alot to switch this car over to this but I think we are ready to rock.. See you in Memphis..
How many stages are you spraying? How much are you spraying on each stage? What motor is this going on?
Also how much is the plate kit for the camaro? I have one of your 78mm plate kits that I got for my truck and never installed. I just need the 90mm plate, hard lines, and brackets.
Also how much is the plate kit for the camaro? I have one of your 78mm plate kits that I got for my truck and never installed. I just need the 90mm plate, hard lines, and brackets.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Launching!
Joined: Mar 2008
Posts: 251
Likes: 0
Niiiiiice PLumbing, its shows when someone takes pride in their work and i love it.
What EBK INtake is that, did you have to drill your own holes.?
I see Two Systems, but with all the solenoids it looks like your going to be turning it off..on...off..on..im curious to what your planning.
And what contollers.ignition.setup you are wokring with.....can you go into detail...or dont wanna giv alot away..
using the better nozzles i assume?
PS
DO YOU SELL THIS SETUP?
why goin with a heavy 2010 LIGHTEN it UP!!!
What EBK INtake is that, did you have to drill your own holes.?
I see Two Systems, but with all the solenoids it looks like your going to be turning it off..on...off..on..im curious to what your planning.
And what contollers.ignition.setup you are wokring with.....can you go into detail...or dont wanna giv alot away..
using the better nozzles i assume?
PS
DO YOU SELL THIS SETUP?
why goin with a heavy 2010 LIGHTEN it UP!!!
Looks like its going to be spraying so hard, that the solenoids will be for fuel alone and the gas tank will be converted to a bigass n20 tank lol
Lol... Ok Guys I am full of you know what.. Im just talking trash... Our 2010 is still pretty much stock other than the plate system we just finished installing on it for GM Hightech. We will be at the memphis shoot out but our car will be no where close to being fast. So we will be cheer leading for the guys that have busted there butts to get there cars ready to compete for the fastest 2010 Camaro title.
This intake is an Intake we just plumbed for FastBlackTA--(the one that posted above saying weak souce)lol It is going on his forth gen..
For the guy asking yes we plumb intakes on a daily basis. This particular intake is a Edelbrck Super Victor with 3 stages. Two stages consist of two different Nitrous Outlet 4 solenoid directports and the other stage is a spraybar we machine into the intake. He will probably use the spray bar to get out and on top of the tire and then throw everything at it with the two other stages.
Dave
This intake is an Intake we just plumbed for FastBlackTA--(the one that posted above saying weak souce)lol It is going on his forth gen..
For the guy asking yes we plumb intakes on a daily basis. This particular intake is a Edelbrck Super Victor with 3 stages. Two stages consist of two different Nitrous Outlet 4 solenoid directports and the other stage is a spraybar we machine into the intake. He will probably use the spray bar to get out and on top of the tire and then throw everything at it with the two other stages.
Dave
Recieved the new plate Kit for OrangeChevyII's car today. Maybe it will make its way on the car this weekend and power the car into the low low low 10's.
We dont need no stinkin blower!
We dont need no stinkin blower!
