Another cam only 500RWHP C6 From Vengeance Racing

Reply Subscribe

Thread Tools

Search this Thread

Oct 15, 2009 | 06:17 PM

Ron@Vengeance

Thread Starter

FormerVendor

iTrader: (51)

Joined: Nov 2001

Posts: 5,628

Likes: 1

From: Cumming GA

Another cam only 500RWHP C6 From Vengeance Racing

Delivering this one tomorrow folks!!!!! This BEAUTIFUL C6 came to us from a Corvette Forum member with ARH longtubes/Vararam Induction/B&B Bullit Exhaust already installed. Baseline #s showed 403RWHP/401RWTQ. The owner was looking for max effort horsepower without a huge sacrifice in drivability in the lower RPMs...

We added:

Vengeance Racing Stage IV LS3 Camshaft
Comp 921 Spring Kit
Hardened Pushrods
Katech C5R Timing Chain
Melling Oil Pump
Milled The Cylinder Heads for added compression
ARP Head Bolts
GM MLS Head Gaskets
Installation/Tuning by Vengeance Racing

STOCK PULLEY
STOCK WATERPUMP
STOCK CLUTCH

We also completed extensive testing of the new FAST LSXR 102mm Manifold on this combo which has been posted in a few other threads already.

The result is 502 REAL RWHP/457 REAL RWTQ with EXCELLENT street manners

101RWHP/56RWTQ Gain from a Cam Kit with a slight bump in compression!!!

Here are a few pics/dyno graph and drivability videos for your viewing pleasure!!!

Dyno Graph

Couple Drivability videos including cruising in 6th gear at 60mph under 1400rpm

http://www.youtube.com/watch?v=QKPtZh_khDs

http://www.youtube.com/watch?v=i62UMbsfrfA

http://www.youtube.com/watch?v=I9cLIaWNbsA

http://www.youtube.com/watch?v=hE6JLipd1mg

Oct 15, 2009 | 06:22 PM

02SOMWS6

10 Second Club

iTrader: (6)

Joined: Nov 2003

Posts: 2,638

Likes: 2

From: Wallkill ,NY

thats sick. Great job guys!

Oct 15, 2009 | 06:48 PM

TXZ28LS1

TECH Senior Member

iTrader: (5)

Joined: Mar 2004

Posts: 6,163

Likes: 3

From: Classified

bad *** ron!!!!! sick to see the power coming out your shop. keep up the good work!!

Oct 15, 2009 | 07:24 PM

colby72olds

TECH Fanatic

iTrader: (7)

Joined: May 2007

Posts: 1,733

Likes: 0

From: Arab, Al

Great #'s and good looking car!

Oct 15, 2009 | 07:51 PM

raymond mckinney

10 Second Club

iTrader: (4)

Joined: Mar 2005

Posts: 1,288

Likes: 86

From: Tampa, FL

How much did you mill the Heads? Also is that the stock TB and why? Roughly how big is that Cam?

Oct 15, 2009 | 11:30 PM

2SLO4ME

Launching!

iTrader: (39)

Joined: Mar 2005

Posts: 252

Likes: 0

From: Michigan

Ron how was the PV clearance with the milled heads? I noticed that your site says it must be checked.

Quote:

Originally Posted by raymond mckinney

How much did you mill the Heads? Also is that the stock TB and why? Roughly how big is that Cam?

239/251 .624/.624 113+3

Oct 15, 2009 | 11:55 PM

bongva

TECH Enthusiast

iTrader: (7)

Joined: Jul 2008

Posts: 726

Likes: 0

wow very nice! but the vids dont work for me!

6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'

Brett Foote

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Pouria Savadkouei

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Verdad Gallardo

7 Most Reliable High-Performance Engines GM Has Ever Built

Verdad Gallardo

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Oct 16, 2009 | 07:25 AM

SLOC5LS6

Banned

Joined: Mar 2009

Posts: 307

Likes: 0

Nice Gains

Last edited by NA$TY-TA; Nov 2, 2009 at 06:27 PM.

Oct 16, 2009 | 12:39 PM

#10

BADZOH6

On The Tree

iTrader: (3)

Joined: Jan 2009

Posts: 126

Likes: 0

From: Georgia

That is impressive. Vengeance RULES!!!!!!!

Oct 16, 2009 | 05:09 PM

#11

WSsick

12 Second Club

iTrader: (13)

Joined: Apr 2008

Posts: 2,417

Likes: 3

From: St. Peters, MO

that is one sick vette its got everything; power, looks, and it gets around town just fine. what kind of wheels are those?

Oct 16, 2009 | 05:47 PM

#12

Martin HD-28

TECH Enthusiast

iTrader: (16)

Joined: May 2006

Posts: 688

Likes: 1

From: E'town Kentucky

Not sure I would call it "cam only" but great #'s nonetheless!!

Oct 16, 2009 | 06:06 PM

#13

sabastian458

Launching!

iTrader: (5)

Joined: Jun 2009

Posts: 220

Likes: 0

From: Upstate, SC

was the FAST already installed? it wasnt listed as so. sick numbers either way

Oct 17, 2009 | 10:06 AM

#14

ScreaminRedZ

registered user

iTrader: (3)

Joined: Oct 2005

Posts: 2,941

Likes: 0

Huge numbers! Damn LS3's making us all look bad, haha.

Oct 17, 2009 | 11:21 AM

#15

BADZOH6

On The Tree

iTrader: (3)

Joined: Jan 2009

Posts: 126

Likes: 0

From: Georgia

Quote:

Originally Posted by WSsick

that is one sick vette its got everything; power, looks, and it gets around town just fine. what kind of wheels are those?

Those are COR wheels. They are pretty cool.

Oct 18, 2009 | 07:00 AM

#16

allngn_c5

TECH Senior Member

iTrader: (3)

Joined: Apr 2006

Posts: 6,524

Likes: 1

From: Western Burbs of Detroit

Nice job Guys !! Looks like another happy customer leaving Vengeance Racing !!

That cam makes nice power all thru the RPM range, but that topend KICKS ***! Can't wait to see this guy take his car for a top speed run. She is going to fly !

Could you remind me about the results on the lsxR intake. Unported it gained 8/9 to the wheels, what did it do after porting ?

Oct 18, 2009 | 07:53 AM

#17

cookba

Banned

iTrader: (10)

Joined: May 2006

Posts: 2,841

Likes: 0

From: Tampa

what was the reason behind using the Katech C5-R chain? and were the sprockets upgraded too? are the C6's setup weak in stock form?

Oct 18, 2009 | 06:06 PM

#18

Spectre86

TECH Fanatic

iTrader: (42)

Joined: Sep 2008

Posts: 1,166

Likes: 39

From: Oregon

Quote:

Originally Posted by 2SLO4ME

Ron how was the PV clearance with the milled heads? I noticed that your site says it must be checked.

239/251 .624/.624 113+3

Quote:

Originally Posted by raymond mckinney

How much did you mill the Heads? Also is that the stock TB and why? Roughly how big is that Cam?

Also curious. Did you have to flycut?

Im still up in the air for my LS2/L92 head swap and dont wish to flycut.

Oct 20, 2009 | 07:51 AM

#19

Ron@Vengeance

Thread Starter

FormerVendor

iTrader: (51)

Joined: Nov 2001

Posts: 5,628

Likes: 1

From: Cumming GA

Thanx guys!!!

This camshaft WILL fit without flycutting IF you do not mill the heads. We wanted the added compression so we milled AND flycut to keep things safe.