Aeroforce Scan Gauge (Video Demo)
Man, thats a badass vid! Ive had my gauge for a couple years now and never knew it had that many options! I'm going out to play with mine right now 
It does have a reading for MAP, so if you are running an SD tune with a 2 or 3 bar MAP sensor and your computer has been recalibrated with something like HPtuners, I don't see why it wouldnt show positive psi.
It does have a reading for MAP, so if you are running an SD tune with a 2 or 3 bar MAP sensor and your computer has been recalibrated with something like HPtuners, I don't see why it wouldnt show positive psi.
LOL.. nice.. now you know!
It has vacuum PSI and stuff like that.. idk if that would show it
OH Gotcha. Well I like mine in the gauge pod, cause it's in my face and I can see it easily. I wouldn't wanna have to look down to see the gauge. But whatever's easiest for you is what you want.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
One or two gauges.
my friends Saleen has a gauge like this on his rear mirror. the LED lights just show up on the mirror telling him the reading. i thought that was bad ***. never seen anything like that. do they make those for our cars?
When you turn your gauge on the highest DIM setting (brightest) does it give off a really low wining sound? I leave mine on 2 because of that, still extremely bright.
As far as the accuracy of the 1/4. I dont think its accurate. Said my bolt-on v6 wen 13.81 LOL. Also said I had like 250hp 500 ft/lbs of torque hahah. There is a way to adjust the performance reading and the HP/TQ number outputs, just not sure how to do it.
I have my gauge on cycle scan right now. It monitors 8 or 6 things I believe, just cycles through them. So if your not sure on purchasing the dual, you can always do that with the single.
As far as the accuracy of the 1/4. I dont think its accurate. Said my bolt-on v6 wen 13.81 LOL. Also said I had like 250hp 500 ft/lbs of torque hahah. There is a way to adjust the performance reading and the HP/TQ number outputs, just not sure how to do it.
I have my gauge on cycle scan right now. It monitors 8 or 6 things I believe, just cycles through them. So if your not sure on purchasing the dual, you can always do that with the single.
just ordered the dual setup. thanks New Era Performance for having that special 
Sucks for my because since i live in NYS, New Era had to charge me tax; none the less, its still the cheapest out of every other sponsor and non-sponsor.
Sucks for my because since i live in NYS, New Era had to charge me tax; none the less, its still the cheapest out of every other sponsor and non-sponsor.
