Purge Solenoid Malfunction??
Purge Solenoid Malfunction?? Just recently my HSW purge solenoid stopped working when the pressure was above 900. I noticed it when i came out of work this afternoon my gauge read 1100, so I tried to purge and nothing. I could hear the click, but no purge.
So i purged the old fashioned way by disconnecting the nozzle and manually hitting the WOT switch. I hit the purge button and worked fine. Opened the bottle back up and nothing again. I tried several times, is this common?
So i purged the old fashioned way by disconnecting the nozzle and manually hitting the WOT switch. I hit the purge button and worked fine. Opened the bottle back up and nothing again. I tried several times, is this common?
Just recently my HSW purge solenoid stopped working when the pressure was above 900. I noticed it when i came out of work this afternoon my gauge read 1100, so I tried to purge and nothing. I could hear the click, but no purge.
So i purged the old fashioned way by disconnecting the nozzle and manually hitting the WOT switch. I hit the purge button and worked fine. Opened the bottle back up and nothing again. I tried several times, is this common?
So i purged the old fashioned way by disconnecting the nozzle and manually hitting the WOT switch. I hit the purge button and worked fine. Opened the bottle back up and nothing again. I tried several times, is this common?
Nick
Did you get yours figured out, because I sent mine back in for doing the same thing.They checked it and said nothings wrong with it. I will have it back tomarrow for another try. They said I must have hooked it up wrong??
Jay
Jay
Here's the thing. My buddy thought(and I thought) it would be cool to use the cigerette lighter as the purge button. Basically modded it to not lock in place and just be spring action. and then wired it up to act as a button. When the metal contacts touch it engages the purge solenoid. Has anybody done this before? I think this just crapped out my system.
It sounds like you were pulling too many amps off of one circuit or short circuited the system when you modified the cig. lighter. Go over all of your fuses and see if any are popped. If so, I would recommend pulling some items off of 1 circuit and use a push button for the lighter idea.
Nick
Nick
It sounds like you were pulling too many amps off of one circuit or short circuited the system when you modified the cig. lighter. Go over all of your fuses and see if any are popped. If so, I would recommend pulling some items off of 1 circuit and use a push button for the lighter idea.
Nick
Nick
Trending Topics
Mine still malfunctions. Sitting in the staging lanes it works fine while randomly checking it,then bottle pressure gets to 1050 while staging and guess what, my purge won't work.
I'm in the market for a better purge noid. My NX noid seems to work to 1200 psi
Jay
I'm in the market for a better purge noid. My NX noid seems to work to 1200 psi
Jay
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Maybe we've covered this already but where is your solenoid grounded? Also make sure that the tower is torqued to spec if the nut was ever loosened.
Nick
Grounded the same place my whole kit is grounded. Also doesn't work directly connected to the battery. It's done it since day one. How does ground change with bottle pressure? Does the ground jump off the battery when the bottle gets hot? I even bought a second pressure gauge to verify that it wasn't to hot. Anyways I'm not angry about it yet. I am looking for a replacement on eBay. If it works flawlessly just swapping it in, then I may have a new opinion. If it doesn't I will admit I'm an idiot.
