TFS 220cc "As Cast"/Yella Terra Rockers/Kooks 1 7/8" Race Headers
TFS 220cc "As Cast"/Yella Terra Rockers/Kooks 1 7/8" Race Headers Trick Flow 220cc "As Cast" Cylinder Heads milled to 59cc Combustion Chambers by Vengeance. $1,550 Plus Shipping.
Yella Terra Ultra Lite 1.7 Rockers. $425 Plus Shipping.
Kooks 1 7/8" F-Body Race Headers and 3" Kooks Y-Pipe $950 Plus Shipping.
Comp Cam 232/240 .580"/.580" 110 LSA+2 $300 Plus Shipping.
These items have LESS THAN 1,000 miles on them. Will sell as a package deal for $3,100 Plus Shipping.
Yella Terra Ultra Lite 1.7 Rockers. $425 Plus Shipping.
Kooks 1 7/8" F-Body Race Headers and 3" Kooks Y-Pipe $950 Plus Shipping.
Comp Cam 232/240 .580"/.580" 110 LSA+2 $300 Plus Shipping.
These items have LESS THAN 1,000 miles on them. Will sell as a package deal for $3,100 Plus Shipping.
Last edited by Bhogan909; Oct 24, 2009 at 09:29 PM.
Yes they would work great, but are a standard 3.905 bore combustion chamber. Assuming your pistons are .008" out of the hole and you use 4.030 head gaskets with .052" compressed thickness you will be right at 8.99:1 compression ratio. You could send these heads back to Trick Flow or Total Engine Airflow and have them opened up to a 4.00" bore if you would like.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Yes they would work great, but are a standard 3.905 bore combustion chamber. Assuming your pistons are .008" out of the hole and you use 4.030 head gaskets with .052" compressed thickness you will be right at 8.99:1 compression ratio. You could send these heads back to Trick Flow or Total Engine Airflow and have them opened up to a 4.00" bore if you would like.
pics of the heads to daddy33@hotmail.com please
will the 59cc clear a g5x3 cam? kinda similar to the ms3
will the 59cc clear a g5x3 cam? kinda similar to the ms3
The heads are still on the car and will not be removed. I'm not going to state for sure that it will fit. You always need to check piston to valve clearance. With the valve angle of Trick Flow heads, it does give more room.