6.07 119.17mph--1.42--300 shot (DRY)--ericg69ss--02 Trans Am--TH400--09/10--275DR

Hard to see on the video but this was the last pass I made before I sold the motor. Track was **** that day and had to footbrake it. Gunning for that 8 second slip when the new combo is finished and running. Night vision video FTW!

 

10.54@134--1.53--100 shot--Jdaniel--'99 FRC Corvette--MN6 6spd--16-Oct-2009--#22


I know that 2009 is almost over with but more times will come for 2010. Here is my time slip and a video!


http://www.youtube.com/watch?v=eK1lrYNSKe8




Here is a break down of the mods and I was spraying a 100 shot!

1999 Corvette FRC

Cartek Stage 4X heads. Includes, full porting heads intake, exhaust, and combustion
chamber, Manley sever duty stainless valves, 2.02 intake, 1.57 exhasut, seals, Manley dual springs, spring seats, seals, titanium retainers, milled .030, cleaned and assembled.

Custom grind Cartek Stage 2X Cam computer verified.
228-232 582-598 116LSA

Cromoly hardened push rods.

Cometic heavy duty head gaskets.

ASP under drive pulley with belts.

Roll master dual roller timing chain.

Z06 ported oil pump setup for the roll master.

FAST 3 piece intake manifold ported to 4X with a 90MM throttle opening.

Ported LS2 throttle body.

ECU Reprogram 97-2004 LS1 full dyno tune.

Notch piston for clearance.

Complete NX system includes, NX wet kit with 10# bottle, purge, MSD digital RPM window switch, timing retard module, custom switch panel with micro switches and LED lights, all wires, Bosch relays. Also includes, blow down tube, full throttle switch, Kenny Bell Boostapump, and NGK TR6 spark plugs.

Nitrous Outlets Fully automated aluminum bottle heater

4.10 gears.

C5 passenger and driver side 300M output shaft with side gear.

C5 line lock kit includes pre-bent line with braided flex hose, inline line lock solenoid, and switch installed.

Vararam intake

Vararam Power duct

GM Racing spark plug wires

160* thermostat

New Coolant crossover

American Racing Headers (1 7/8 primaries 3" collector)

American Racing 3" X pipe

Borla Stinger 2.5" catback

Built tranny by Lethal Performance

Hurst C6 short throw shifter

Spec III Clutch and Billet aluminum flywheel

Brand new Slave cylinder

Upgraded Tick Performance Master cylinder

Innovate LC1 Wideband

 

Be sure to put them up in this format or it will not be posted:

ET@MPH--60'--size shot--Username--car--Trans--date--Post #

 

If you want to add tire to mine. I run on Hoosier 30x10.5 radial. Also delete the #9 time slot. That is my old time.

 

Sorry. All I read was the first post and the list. I didnt see the second post and your format request. Fixed.

 

9.005@150.20--1.34--300 shot--Ls1speedaddict--'00 Trans Am--Glide--11/7/09--Post #25

 

Damn that baby is moving out. Congrats.

 

9.44 @ 145----1.54--XXX shot--BAKED--99 Camaro--Glide--11/8/09--post # 28

Damn 60' killed me on that run. It usually cuts 1.3X 60's......

 

-Update-

Finally broke the 10 sec barrier!

ET@MPH--60'--size shot--Username--car--Trans--date--Post #

10.89@125.05-1.56-150 Shot-Sofls1-98 Camaro SS-4l60e-10/7/2009-26x8.5 16 ET Street

 

10--9.061@153.8--1.35--350 shot--OutlawZ----- '95 Camaro--TH400--10/31/09-Post 30

 

12---9.28@144.21--1.33--275 shot--Tony Shepherd----93 z28 LT1------TH400--07/15/09 -Post 31

 

Updated....

10.860@129.01--1.54--150--DiabloFormula--98 Formula--M6--11/28/09--28x11.5x15 ET Street--Post 32

 

1---9.231 @ 148.07 mph
1.388
350 shot
magnum-gto
2006 GTO
TH400
11/28/09
post 33

 

Man I feel cheated, lol, my list I have been doing for years. How come ya never even PMed me or E-Mailed, I looked?

You know the original list should at least be linked. Why? Well I do lists at the Corvetteforum too, just for insight, and many, many go to the posts on the run for information. At the vette forum I also include the post number for this exact reason. Something to consider. Also, wasn't there links for the prior years? this was used for comparason among other reasons and another reason tolink the original thread. It is a lot of work to keep everything lined up isn't it, most don't see this?

Man I am sorry I fell behind, however, serious issues have been at hand for the last year. I do know that Noyzee Pm a month back and was going to help and a few others asked for updates. All mods had access to help. However, one mod that is listed in all the years I have been here he never once posted in the section he was a mod in, lol. Gosh, couldn't you guys give me the benefit of the doubt?
Robert

 

Sorry man, hope you arent pissed at me, I just wanted an updated list like many others and decided to ask and take it over. You can do it next year if you want to keep up on it, If not I am on here litterally every single day so it is not a big deal to me. There were no past links to other years in your 2009, I copied everything to this one.

and yes it is a lot to keep aligned, adding one is a lot of fun with a big list but no big deal.

-Cameron

 

Naw, not pissed, just a little disappointed that's all. Thanks for stepping up though, you have done a great job. Not many will take the time to make it nice like we have done. Look at some of the other lists on the web and we can see ours is the best, bar none. Well maybe the one at the C6 Z06 forum is better, but annal Vette owners, lol, and I am not the guy there just the C5 Z06 list... maybe we can set it up for next year where you can be co-author and help out, that i would like as it's hard to keep up even in the best of times. Not many stick around the whole year and especially year after year. Lets play it by ear and I will talk to the mods and see if we can co-author it. Usually (past years)the mods help, however, Noyzee has been to busy and the other mods have all fallen by the way side so probably not much help there.

That's been a problem here for some time, the mods outside of Noyzee are not even interested in the nitrous section. When I was mod here I put 98% of my posts here and was active daily, maybe they will realize that dedication means something and reinstate my position as I no longer sell nitrous kits so cry-babies can't complain, lol, about conflict of interest. By the way, it looks like the list picked up some in the last month or so, it seemed way slower this year for a long time. It must be a sign of the times. I know I didn't get any runs to post and that is unusual. I will see if I can find the prior years to add links. I know '08 had the links, IIRC and at least '07 did?

Thanks for responding, that in of itself means a lot to me.
Robert

 

Cool sounds good to me. We will figure it out. Yea I do lists on other boards as well and am a neat freak so it has to look good to me or I wont post it. **** I guess. I have been here for awhile listening and learning and now able to offer help to most so now post a lot more in the section as I know a lot more compared to before. People come and go but Ill be around for awhile while procrastinating on the internet rather then doing school work or studying for finals like I am doing right now. haha.

pm me whenever and we can decide on what to do, so we dont clutter this bad boy up. lol.

-Cameron

 

Cool, will do, PM from here on. When I was mod doing the list I could go in a delete un-needed posts. This really helps clean up the entire thread making it easy for guys to seek info rather than BS, LOL. I know I like reading about certain combos to see what they have done. Maybe next year we can add the Post # so it's easy to find specific run info and details...
Robert

 

10.96@129.74--1.78--200 shot--CanadianEh!--2001 Conv Camaro Z28--A4--09/18/09,--Post

Run on heavy steet rims. Just got new Weld Pro Stars for Christmas along with NANO and dedicated fuel system....hoping for low-mid 10 seconds runs in 2010!

 

Im curious, why myself and team owner were taken down off the list. Rob Valden/PAIN 01 Trans AM 8.43 @ 159, powerglide, 1.29 60ft ...Did this at LSX shootout 2 years ago.

thanks,

-rob