Highest Horse Power Numbers using a ProChargers D1SC
Thread Starter
11 Second Club
iTrader: (12)
Joined: Nov 2005
Posts: 636
Likes: 0
From: Fort Wayne, Indiana
Highest Horse Power Numbers using a ProChargers D1SC Hey guys as the title says Im just wondering what the highest horsepower numbers people have seen while using the D1SC head unit. Some friends and I just got back from a trip and we had great results with the current set up and was wondering what levels others were at with the same system or head unit from ProChargers.
Give some details of the combo and the highest horse and tq numbers while still using the D1SC head unit please.
One combo the tuning shop had seen before was a
C5, 408, l92 heads, Beck intake, and D1SC maxed out making 780rwhp using a dyno jet.
Lets here your best results Thanks
Give some details of the combo and the highest horse and tq numbers while still using the D1SC head unit please.
One combo the tuning shop had seen before was a
C5, 408, l92 heads, Beck intake, and D1SC maxed out making 780rwhp using a dyno jet.
Lets here your best results Thanks
I think mine is up there. 808.65 RWHP and 729.95 RWTQ, that was before I was overspinning the blower, no new numbers yet. Blower was at 59,000RPM then. This was with a 4L60E, triple disk Vig. converter, steel DS, 12bolt with true track, 33 splines, and 17x12 Fikses.
Setup consists of:
9.62:1 396ci
AFR 205's
Custom XP Racing blower cam
1 7/8" Kooks LT's, custom 3" ORY
Built 4L60E (other drive train stuff metioned above)
18psi out of the blower (it makes 19.5 now, again, no numbers)
Setup consists of:
9.62:1 396ci
AFR 205's
Custom XP Racing blower cam
1 7/8" Kooks LT's, custom 3" ORY
Built 4L60E (other drive train stuff metioned above)
18psi out of the blower (it makes 19.5 now, again, no numbers)
my old number are in my sig... the cam i used if for sale custom grind by lme/cam motion
$300 shipped... my setup was no where near maxed out... everyone said the cam was too big but idles great and so was the power. if i dig into old threads i can probably find the spec sheet. but im sure lme has it on file too.
$300 shipped... my setup was no where near maxed out... everyone said the cam was too big but idles great and so was the power. if i dig into old threads i can probably find the spec sheet. but im sure lme has it on file too.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
